[1]宋广民,韩国辉,刘 宇,等.转动惯量对断路器弹簧机构系统性能的优化分析[J].高压电器,2019,55(09):230-235.[doi:10.13296/j.1001-1609.hva.2019.09.031]
 SONG Guangmin,HAN Guohui,LIU Yu,et al.Optimization-Analysis the System Performance of the Spring Operating Mechanism of Circuit Breaker by the Rotational Inertia[J].High Voltage Apparatus,2019,55(09):230-235.[doi:10.13296/j.1001-1609.hva.2019.09.031]
点击复制

转动惯量对断路器弹簧机构系统性能的优化分析()
分享到:

《高压电器》[ISSN:1001-1609/CN:61-11271/TM]

卷:
第55卷
期数:
2019年09期
页码:
230-235
栏目:
技术讨论
出版日期:
2019-09-30

文章信息/Info

Title:
Optimization-Analysis the System Performance of the Spring Operating Mechanism of Circuit Breaker by the Rotational Inertia
作者:
宋广民 韩国辉 刘 宇 郭良超 惠勇锋 李美荣
(平高集团有限公司, 河南 平顶山 467001)
Author(s):
SONG Guangmin HAN Guohui LIU Yu GUO Liangchao HUI Yongfeng LI Meirong
(Pinggao Group Co., Ltd., Henan Pingdingshan 467001, China)
关键词:
高压断路器 弹簧操动机构 转动惯量 优化设计
Keywords:
high voltage circuit breaker spring operating mechanism rotational inertia optimization design
DOI:
10.13296/j.1001-1609.hva.2019.09.031
摘要:
断路器是电网系统的重要开关设备,500 kV及以下电压等级的断路器通常采用弹簧操 动机构作为其驱动装置。提高弹簧操动机构的输出效率,降低弹簧操作功,能够改善弹簧操动 机构零部件的受力状况,对提高断路器开关的可靠性具有重要意义。文中对断路器弹簧操动机 构的运动零部件转动惯量进行分析,通过仿真优化和试验验证的方法,得到运动零部件转动惯 量对高压断路器弹簧操动机构性能的影响,为后续断路器弹簧操动机构的设计与优化指明方向 ,具有一定的指导意义。
Abstract:
As an important switching equipment of power grid system, circuit breaker with voltage level of 500 kV and below usually uses spring operating mechanism. Improving the output efficiency of the spring operating mechanism and reducing the spring operating work can improve the force condition of the parts of spring operating mechanism, which is of great importance for improving the reliability of the circuit breaker switch. In this paper, the rotational inertia of moving parts has been analyzed in spring operating mechanism of circuit breaker , through the method of simulation optimization design and test verification, the effect of the rotational inertia of moving parts in spring operating mechanism of circuit breaker has been obtained. It has a certain guiding significance for the design and optimization of spring operating mechanism of circuit breaker.

参考文献/References:

[1] 林 莘. 现代高压电器技术[M]. 北京:机械工业出版社,2002. LIN Xin. Modern high voltage electric apparatus technology[M]. Beijing: China Machine Press, 2002.
[2] 赫尔曼·科赫. GIS(气体绝缘金属封闭开关设备)原理与应用[M]. 钟建英,林  莘,张友鹏,译. 北京:机械工业出版社,2017. KOCH H. Principles and applications of GIS(gas-insulated substations)M]. ZHONG Jianying, LIN Xin, HANG Youpeng, Translated. Beijing:China Machine Press,2017.
[3] 罗学琛. SF6气体绝缘全封闭组合电器(GIS) [M]. 北京:中国电力出版社,1999. LUO Xuechen. Gas insulated switchgear(GIS)of SF6[M]. Beijing: China Electric Power Press ,1999.
[4] 黎 斌. SF6高压电器设计[M]. 北京:机械工业出版社,2003. LI Bin. SF6 high voltage apparatus design[M]. Beijing: China Machine Press ,2003.
[5] 陈保伦,文亚宁. 断路器弹簧操动机构介绍[J]. 高压电器,2010,46(10):75- 80. CHEN Baolun,WEN Yaning. Introduction of spring operating mechanism for CB [J]. High Voltage Apparatus,2010,46(10): 75-80.
[6] 楼家法. 高压开关机构设计[M]. 北京:机械工业出版社,1981. LOU Jiafa. High-voltage switchgear mechanism design[M]. Beijing: China Machine Press,1981.
[7] 王 振. 高压电器中的开关设计分析[J]. 价值工程,2012,31(20):80-81. WANG Zhen. Switch design of high voltage electric appliance[J]. Value Engineering, 2012,31(20): 80-81.
[8] 苑 舜. 高压断路器弹簧操动机构[M]. 北京:机械工业出版社,2001. YUAN Shun. Spring operating mechanism for CB[M]. Beijing: China Machine Press ,2001.
[9] 李建基. 高压断路器及其应用[M]. 北京:中国电力出版社,2004:184-204. LI Jianji. High voltage circuit breaker and its application[M]. Beijing: China Electric Power Press,2004: 184-204.
[10] 林 莘. 现代高电压电器技术[M]. 北京:机械工业出版社,1990. LIN Xin. Technology of modern high voltage appliance[M]. Beijing: China Machine Press , 1990.
[11] 王连鹏,王尔智. 真空断路器弹簧操动机构优化设计与可靠性分析[J]. 高压电器 ,2005,41(3):166-169. WANG Lianpeng,WANG Erzhi. Optimal design and reliability analysis of the spring actuator for vacuum circuit breaker[J]. High Voltage Apparatus,2005,41(3): 166-169.
[12] 崔景春,袁大陆,杜彦明. SF6断路器操动机构的运行可靠性和选型探讨[J]. 高 压电器,2001,37(2):1-4. CUI Jingchun,YUAN Daliu,DU Yanming. Investigation on operational reliability and type selection of actuator for SF6 circuit breaker[J]. High Voltage Apparatus,2001,37(2): 1-4.
[13] 张义民,黄贤振. 机械产品研发的可靠性规范[J]. 中国机械工程,2010,21(23) :2773-2785. ZHANG Yimin,HUANG Xianzhen. The reliability of the mechanical product development[J]. China Mechanical Engineering,2010,21(23): 2773-2785.
[14] 杨慧钦. 提高高压断路器可靠性的动向[J]. 高压电器,1998,34(2):61-64. YANG Huiqin. To enhance the reliability of high voltage circuit breaker[J]. High Voltage Apparatus,1998,34(2):61-64.
[15] 李增刚. ADAMS入门详解与实例[M]. 北京:国防工业出版社,2006. LI Zenggang. ADAMS detailed introduction and example[M]. Beijing: National Defense University Press,2006.
[16] 郭卫东. 虚拟样机技术与ADAMS应用实例教程[M]. 北京:北京航空航天大学出版 社,2008. GUO Weidong. Virtual prototyping technology and ADAMS application example tutorial[M]. Beijing: Beijing University of Aeronautics and Astronautics Press ,2008.
[17] 康 庄. 高压开关操动机构虚拟样机建模与动态仿真研究[D]. 上海:华东理工大 学,2010. KANG Zhuang. Research on ADAMS modeling and dynamic simulating of operating mechanism of highvoltage circuit breaker[D]. Shanghai: East China University of Science and Technology,2010.
[18] 崔彦彬,高 志,曹云鹏. 基于ADAMS的高压断路器操动机构动力学仿真研究[J]. 机械设计与制造,2006(4):66-67. CUI Yanbin,GAO Zhi,CAO Yunpeng. Dynamics simulation study on application ADAMS for the operating device for HV circuit[J]. Machinery Design & Manufacture,2006(4): 66-67.
[19] 高压交流断路器:GB 1984—2014[S]. 2014. High-voltage alternating- current circuit-breakers:GB 1984—2014[S]. 2014.
[20] 高压交流断路器订货技术条件:DL/T 402—2007[S]. 2007. Specification of high voltage alternating-current circuit-breakers: DL/T 402—2007[S]. 2007.
[21] 贾一凡,殷晓刚,姚晓飞,等. 智能化高压开关机械试验测试用位移传感器的分析 与研究[J]. 高压电器,2013,49(10):58-63. JIA Yifan,YIN Xiaogang,YAO Xiaofei,et al. Analysis and study on displacement transducer for testing in mechanical test of intelligent high-voltage switch[J]. High Voltage Apparatus,2013,49(10): 58- 63.

备注/Memo

备注/Memo:
收稿日期:2019-06-01; 修回日期:2019-08-04 基金项目:国家电网有限公司总部科技项目资助(高压断路器钣金弹簧操动机构和特高压碟簧 液压机构研制)。 Project Supported by State Grid Science and Technology(Development of Sheet Metal Spring Operating Mechanism and UHV Hydraulic Spring Operating Mechanism for High Voltage Circuit Breaker).宋广民(1986—),男,硕士研究生,工程师,从事高压开关及操动机构设计与研发工作。
更新日期/Last Update: 2019-09-10