[1]张 彦,张宇巍,杨旻宸,等.220 kV变压器箱沿螺栓发热理论分析和现场处理[J].高压电器,2020,56(03):247-252.[doi:10.13296/j.1001-1609.hva.2020.03.037 ]
 ZHANG Yan,ZHANG Yuwei,YANG Minchen,et al.Theoretical Analysis and Field Treatment of Bolt Heating Along the Edge of Fuel Tank in 220 kV Transformer[J].High Voltage Apparatus,2020,56(03):247-252.[doi:10.13296/j.1001-1609.hva.2020.03.037 ]
点击复制

220 kV变压器箱沿螺栓发热理论分析和现场处理()
分享到:

《高压电器》[ISSN:1001-1609/CN:61-11271/TM]

卷:
第56卷
期数:
2020年03期
页码:
247-252
栏目:
技术讨论
出版日期:
2020-03-15

文章信息/Info

Title:
Theoretical Analysis and Field Treatment of Bolt Heating Along the Edge of Fuel Tank in 220 kV Transformer
作者:
张 彦 张宇巍 杨旻宸 黄佳骏 蔡 磊
(国网上海市电力公司市南供电公司, 上海 200030)
Author(s):
ZHANG Yan ZHANG Yuwei YANG Minchen HUANG Jiajun CAI Lei
(South Power Supply Company, SMEPC, Shanghai 200030, China)
关键词:
变压器 漏磁 螺栓 异常发热 分析处理
Keywords:
transformer magnetic flux leakage bolt abnormal heating analysis and treatment
DOI:
10.13296/j.1001-1609.hva.2020.03.037
摘要:
为了解决220 kV变压器箱沿螺栓异常发热问题,先分析红外跟踪数据并总结箱沿螺栓的发热特点,从理论上推导变压器漏磁在箱沿螺栓上产生的涡流损耗数学表达式,根据表达式得出螺栓发热的3个特点,然后根据分析结果,依次采用螺栓替换和加装短接铜排的方法进行处理,结果表明,该法实用性强,能有效消除变压器箱沿螺栓异常发热隐患。
Abstract:
In order to solve the problem which part of bolts along the edge of fuel tank were abnormal heat in 220 kV transformer, the data of infrared lock-on was analyzed and the heating characteristics of the bolts were summarized firstly. Then the mathematical expression of the eddy current loss generated by the magnetic flux leakage of transformer on the bolts along the edge of fuel tank was deduced theoretically. According to the mathematical expression, the three heating characteristics of bolt were obtained. With the result, the bolt replacement and installation of the short connection were used in turn to deal with this problem. It showed that the method was practical and could eliminate the abnormal heating hazard of bolts along the edge of transformer fuel tank.

参考文献/References:

[1] 董其国. 电力变压器故障分析与诊断[M]. 北京: 中国电力出版社,2001. DONG Qiguo. Power transformer fault analysis and diagnosis[M]. Beijing: China Electric Power Press,2001.
[2] 唐新文,刘定友,沙 林,等. SLZ8-315/10.5型干式变铁心夹件连接螺杆发热分析及处理[J]. 高压电器,2008,44(2): 185-192. TANG Xinwen,LIU Dingyou,SHA Lin,et al. Analysis and process of calorific problem of connection screw rod for core fastener of dry-type transformer SLZ8-315/10.5[J]. High Voltage Apparatus,2008, 44(2): 185-192.
[3] MOTALLEB M,VAKILIAN M,ABBASPOUR A. Tank shielding contribution on reduction of eddy current losses in power transformers[C]//Pulsed Power Conference(PPC). [S.l.]:IEEE,2009:641-645.
[4] 赵志刚,程志光,刘福贵,等. 基于漏磁补偿的变压器结构件损耗与磁通分布研究[J]. 高电压技术, 2014,40(6): 1666-1674. ZHAO Zhigang,CHENG Zhiguang,LIU Fugui,et al. Research of structure loss and flux distribute of transformer based on leakage flux compensator[J]. High Voltage Engineering,2014,40(6): 1666-1674.
[5] YANG Sumei, CHENG Zhiguang, YAN Weili, et a1. Stray loss analysis for magnetic shielding with lamination[C]//International Conference on Electrical Machines and Systems(ICEMS). [S.l.]:IEEE,2008, 3907-3911.
[6] 冯晓东. 变压器箱沿螺栓过热的分析和处理[J]. 重庆电力高等专科学校学报,2004,9(1): 9-11. FENG Xiaodong. Treatment of overheat of bolts along the transformer cheat edge[J]. Journal of Chongqing Electric Power College,2004,9(1): 9-11.
[7] 王承志. 变压器绕组端部屏蔽结构及制造工艺[J]. 变压器,2000,37(11): 1-5. WANG Chengzhi. End shield structure of transformer winding[J]. Transformer,2000,37(11): 1-5.
[8] 苏钟焕. 磁分路对电力变压器杂散损耗及结构件温升的影响研究[D]. 湖南: 湖南大学,2016. SU Zhonghuan. The study of influence of magnetic shunt to the stray loss of transformer and temperature rise of structure part[D]. Hunan: Hunan University, 2016.
[9] 李 季,罗隆福,许加柱. 电力机车主变压器油箱损耗的三维有限元分析[J]. 高压电器,2005,41(3): 186-188. LI Ji,LUO Longfu,XU Jiazhu. 3D finite element analysis of the transformer tank loss in electric locomotive[J]. High Voltage Apparatus,2005,41(3): 186-188.
[10] 张真涛,王予生. 空心电抗器漏磁引起围栏构架发热问题的处理[J]. 电力电容器与无功补偿,2012,33(1): 61-64. ZHANG Zhentao,WANG Yusheng. Heating treatment of fence frame of air core reactor by magnetic flux leakage[J]. Power Capacitor & Reactive Power Compensation,2012,33(1): 61-64.
[11] 朱占新, 谢德馨, 张艳丽. 大型电力变压器三维漏磁场与结构件损耗的时域分析[J]. 中国电机工程学报, 2012, 32(9):156-160. ZHU Zhanxin,XIE Dexin,ZHANG Yanli. Time domain analysis of 3D leakage magnetic fields and structural part losses of large power transformers[J]. Proceedings of the CSEE,2012,32(9): 156-160.
[12] 李 琳,崔 翔,张元禄,等. 电力变压器三维漏磁场及铁芯拉板涡流损耗的计算[J]. 中国电机工程学报,1999,19(6): 33-36. LI Lin,CUI Xiang,ZHANG Yuanlu,et al. Calculation of the 3d nonlinear magnetic field and eddy current loss of the plate in transformer[J]. Proceedings of the CSEE, 1999, 19(6): 33-36.
[13] 耿荣林,谢德馨,李洪友. 变压器箱体涡流损耗的三维有限元分析[J]. 变压器,2008,45(2):1-4. GENG Ronglin.XIE Dexin.LI Hongyou.3D finite element analysis of eddy current loss in transformer tank[J]. Transformer,2008,45(2): 1-4.
[14] 尹克宁. 变压器设计原理[M]. 北京: 中国电力出版社,2003. YIN Kening. Transformer design principle[M]. Beijing: China power press,2003.
[15] 王 雪,王增平. 变压器绕组参数在线计算方法[J]. 电力自动化设备,2012,32(7): 71-75. WANG Xue, WANG Zengping. Online calculation of transformer winding paramaters[J]. Electric Power Automation Equipment,2012,32(7): 71-75.
[16] 王世山,李彦明,郭颖娜. “磁场-电路”耦合法计算变压器短路阻抗[J]. 高电压技术,2006, 32(11): 11-14. WANG Shishan,LI Yanming,GUO Yingna. Calculation of short-circuit impedance for power transformer with coupling FEM method of magnetic field and circuit[J]. High Voltage Engineering, 2006, 32(11): 11-14.
[17] 李晓松,陈乔夫,李荣华,等. 磁势不均布的变压器绕组漏电抗计算[J]. 高电压技术,2005,31(3): 15-17. LI Xiaosong,CHEN Qiaofu,LI Ronghua,et a1. Calculation of leakage reactance for a transformer winding with uneven distribution of magnetic force[J]. High Voltage Engineering,2005,31(3): 15-17.
[18] 井永腾,李 岩,额尔和木巴亚尔. 高压自耦变压器的涡流损耗计算与屏蔽措施[J]. 高电压技术,2012, 38(8): 1988-1993. JING Yongteng,LI Yan, Eerhemubayeer. Eddy current losses calculation and shields of high voltage auto-transformer[J]. High Voltage Engineering, 2012, 38(8): 1988-1993.
[19] 张卫纯,潘风明,张新根,等. 基于有限元法的电力变压器金属结构件损耗分析[J]. 高压电器, 2013, 49(11): 55-61. ZHANG Weichun,PAN Fengming,ZHANG Xingen, et a1. Power loss analysis for structural parts in transformer based on finite element mathod[J]. High Voltage Apparatus,2013,49(11): 55-61.
[20] 张俊杰,李 琳,刘兰荣,等. 进入硅钢叠片内的漏磁通和附加损耗的模拟实验与仿真[J]. 电工技术学报,2013,28(5): 148-153. ZHANG Junjie,LI Lin,LIU Lanrong,et a1. Measurement and 3D FEM analysis of additional loss in laminated silicon sheets caused by leakage flux[J]. Transaction of China Electrotechnical Society,2013, 28(5): 148-153.

备注/Memo

备注/Memo:
收稿日期:2019-11-09; 修回日期:2020-01-13张 彦(1988—),男,工程师,硕士,主要研究方向为变电运行、电气设备绝缘性能检测与故障诊断等方面的研究。 张宇巍(1992—),男,工程师,硕士,主要研究方向为电气设备绝缘性能检测与故障诊断等方面的研究。 杨旻宸(1988—),男,工程师,硕士,主要研究方向为变电运行、电气设备绝缘性能检测与故障诊断等方面的研究。 黄佳骏(1992—),男,工程师,硕士,主要研究方向为变电运行、电气设备绝缘性能检测与故障诊断等方面的研究。 蔡 磊(1983—),男,工程师,硕士,主要研究方向为变电运行、电气设备运行维护和状态检测等方面的研究。
更新日期/Last Update: 2020-03-15