CuCr25 Alloys Prepared by Melting in Vacuum and Its Behavior[J]. High voltageapparatus, 1999, (3): 12-14.DOI：
真空熔炼CuCr25合金及其性能研究
摘要
采用真空熔炼法制备CuCr25合金
能提高CuCr触头村料的生产率、节约Cu、Cr资源.实验结果表明
该合金Cr相尺寸为30～50μm
相对密度大于98%
气体含量低于500×10
-6
Pa
耐电压强度可达到常规方法制备的触头材料的水平.
Abstract
CuCr25 alloy is prepared by smelting in vacuum for the efficient production of contacts and saving Cu
&
Cr materials. The experiment results show that the dimension of Cr phase in the alloy is 30
50
μm
the relative density is higher than 98%
and the gas content is lower than 500 x 10-6Pa. The dielectric strength of the alloy reaches the same level as that of alloys prepared by conventional methods.
陕公网安备 61010402000197