律方成,汪鑫宇,王平,等.基于振动偏离及加权熵的多次短路冲击下变压器绕组机械形变辨识[J].电工技术学报,2023,38 (11):3022-3032.

LYU Fangcheng, WANG Xinyu, WANG Ping, et al. Mechanical deformation identification of transformer winding under multiple short-circuit impacts based on vibration deviation and weighted entropy[J]. Transactions of China Electrotechnical Society,2023, 38(11):3022-3032.

电力变压器第5部分:承受短路的能力:GB/T 1094. 5—2008[S].2009.

Power transformer-part 5:Ability to withstand short circuit:GB/T 1094. 5—2008[S].2009.

袁性忠,王辉,贾宏刚,等.基于储能型APF的微电网电能质量综合治理[J].高压电器,2022,58(8):238-244.

YUAN Xingzhong, WANG Hui, JIA Honggang, et al. Comprehensive power quality control for microgrid based on APF with energy storage[J]. High Voltage Apparatus,2022,58(8):238-244.

李新海,曾新雄,刘建辉,等.基于零损耗深度限流技术提升变压器抗短路能力研究[J].高压电器,2017,53(10):111-116.

LI Xinhai, ZENG Jianxiong, LIU Jianhui, el at. Study on antishort-circuit ability of transformer based on the zero loss deep current limiting technology[J]. High Voltage Apparatus,2017,53 (10):111-116.

邹德旭,郑易谷,钱国超,等.变压器短路时轴向力分布特性与测试分析研究[J].变压器,2020,57(10):24-28.

ZOU Dexu, ZHENG Yigu, QIAN Guochao, et al. Axial force distribution characteristics and test analysis of transformer under short-circuit condition[J]. Transformer,2020,57(10):24-28.

王雪,吴涛.基于磁—结构直接耦合动态分析变压器绕组变形的研究[J].电力系统保护与控制,2017,45(16):24-30.

WANG Xue, WU Tao. Dynamic deformation analysis of transformer windings based on magnetics-structure direct coupled-field[J]. Power System Protection and Control,2017,45(16):24-30.

易梅生,欧强,施广宇,等.变压器标准短路试验与运行短路故障的关系研究[J].变压器,2021,58(6):13-16.

YI Meisheng, OU Qiang, SHI Guangyu, et al. Research on relationship between standard short-circuit test and operation shortcircuit fault of transformer[J]. Transformer,2021,58(6):13-16.

冉德东,孟天男,王雄博,等.三绕组电力变压器单相接地短路电流及绕组强度计算[J].变压器,2022,59(4):48-53.

RAN Dedong, MENG Tiannan, WANG Xiongbo, et al. Calculation of single-phase grounding short-circuit current and winding strength of three-winding power transformer[J]. Transformer,2022, 59(4):48-53.

毛凤春,彭庆军,邹德旭,等.基于有限元方法的变压器几何模型精细度对短路冲击计算的影响研究[J].变压器,2018,55(6):11-16.

MAO Fengchun, PENG Qingjun, ZOU Dexu, et al. Research on the influence of transformer geometric model precision on shortcircuit impulse calculation based onFEM[J]. Transformer,2018, 55(6):11-16.

王熙文,井永腾,张永超,等.变压器近区短路绕组形变动态过程计算与分析[J].变压器,2021,58(12):1-6.

WANG Xiwen, JING Yongteng, ZHANG Yongchao, et al. Analysis of dynamic process of transformer short-circuit deformation in near area[J]. Transformer,2021,58(12):1-6.

李金忠,张书琦,程涣超,等.特高压换流变压器绕组动稳定能力分析[J].中国电机工程学报,2023,43(8):3237-3247.

LI Jinzhong, ZHANG Shuqi, CHENG Huanchao, et al. Dynamic stability analysis of UHV converter transformer winding[J]. Proceedings of the CSEE,2023,43(8):3237-3247.

吴涛.电力变压器绕组短路动态稳定性研究[D].北京:华北电力大学,2018.

WU Tao. Research on short-circuit dynamic stability of power transformer windings[D]. Beijing:North China Electric Power University,2018.

PATEL M R. Dynamic response of power transformers under axial short circuit forces part I - winding and clamp as individual components[J]. IEEE Transactions on Power Apparatus and Systems,1973, PAS-92(5):1558-1566.

王洪方,王乃庆,李同生.短路条件下电力变压器绕组轴向振动等效单自由度分析[J].电工技术学报,2000,15(5):39-41.

WANG Hongfang, WANG Naiqing, LI Tongsheng. Axial vibration equivalent one-degree analysis of power transformer winding under short-circuit[J]. Transactions of China Electrotechnical Society, 2000,15(5):39-41.

张凡,马程,李秀广,等.计及振动响应的变压器绕组轴向机械强度动态评估方法研究[J].中国电机工程学报,2023,43 (16):6494-6504.

ZHANG Fan, MA Cheng, LI Xiuguang, et al. Dynamic assessment of windings'axial mechanical strength in power transformers considering the vibration response[J]. Proceedings of the CSEE, 2023,43(16):6494-6504.

王录亮,刘文里,于会凤.电力变压器绕组轴向短路动态力的计算[J].变压器,2013,50(1):14-17.

WANG Luliang, LIU Wenli, YU Huifeng. Calculation of winding axial short - circuit dynamic force of power transformer[J]. Transformer,2013,50(1):14-17.

李唐兵,童涛,席儒,等.直流偏磁下的电力变压器振动特性研究[J].变压器,2023,60(3):52-58.

LI Tangbing, TONG Tao, XI Ru, et al. Research on vibration characteristics of transformer under DC bias[J]. Transformer, 2023,60(3):52-58.

张博,李岩.多次冲击条件下的大型变压器绕组辐向失稳[J].电工技术学报,2017,32(s2):71-76.

ZHANG Bo, LI Yan. Radial stability of large transformer windings under multiple inrush conditions[J]. Transactions of China Electrotechnical Society,2017,32(s2):71-76.

兰生,胡忠平,廖福旺,等.短路电动力对变压器低压绕组辐向稳定性的研究[J].电机与控制学报,2018,22(5):19-24.

LAN Sheng, HU Zhongping, LIAO Fuwang, et al. Radial stability of transformer low voltage windings under sudden short-circuit[J]. Electric Machines and Control,2018,22(5):19-24.

LIANG Zhenguang, TANG Renyuan, WANG Chuncheng, et al. Stability of transformer's whole low voltage winding[C]//Sixth International Conference on Electrical Machines and Systems, 2003. China:IEEE,2003:302-304.

尹克宁.变压器设计原理[M].北京:中国电力出版社,2003:268-272.

YIN Kening. Design principle of transformer[M]. Beijing:China Electric Power Press,2003:268-272.

李祎春,宋晓光,李军.变压器绕组初始缺陷对辐向稳定性的影响[J].变压器,2021,58(11):21-23.

LI Yichun, SONG Xiaoguang, LI Jun. Influence of initial transformer winding defect on radial stability[J]. Transformer, 2021,58(11):21-23.

赵志刚,李光范,李金忠,等.基于有限元法的大型电力变压器抗短路能力分析[J].高电压技术,2014,40(10):3214-3220.

ZHAO Zhigang, LI Guangfan, LI Jinzhong, et al. Analyzing the short-cinuit withstanding ability of large power transformer based the FEM method[J]. High Voltage Engineering,2014,40(10):3214-3220.

邹德旭,钱国超,井永腾,等.多次短路工况下变压器内绕组径向强度计算[J].电器工业,2021(6):69-73.

ZHOU Dexu, QIAN Guochao, JING Yongteng, et al. Calculation of radial strength of transformer inner winding under multiple shortcircuit conditions[J].Electrical Industry,2021(6):69-73.

张煦,曹辰,路敦林,等.基于电—磁—结构多信息耦合的变压器振动特性仿真与试验[J].变压器,2023,60(7):51-58.

ZHANG Xu, CAO Chen, LU Dunlin, et al. Simulation and testing of transformer vibration characteristics coupling of multiple information based on electromagnetic structure[J]. Transformer,2023, 60(7):51-58.

冯军基,刘力卿,马程,等.计及磁—机耦合效应的变压器绕组短路振动特性研究[J].高压电器,2023,59(8):43-52.

FENG Junji, LIU Liqing, MA Cheng, et al. Study on short-circuit vibration characteristics of transformer winding considering electromagnetic mechanical coupling effect[J]. High Voltage Apparatus,2023,59(8):43-52.

王胜辉,许育帅,孙凯旋,等.多物理场耦合下不同短路与接地故障对变压器绕组状态影响的仿真研究[J].高电压技术,2023, 49(6):2397-2407.

WANG Shenghui, XU Yushuai, SUN Kaixuan, et al. Simulation study on the influence of different short circuit and ground fault on transformer winding state under the coupling of multiple physical fields[J]. High Voltage Engineering,2023,49(6):2397-2407.

王建民,张喜乐,翟元,等.大型变压器绕组漏磁场及电动力学性能的仿真分析[J].电气制造,2012(5):60-64.

WANG Jianmin, ZHANG Xile, ZHAI Yuan, et al. Simulation analysis on magnetic leakage field and short circuit mechanical properties of large transformer windings[J]. Electrical Manufacturing, 2012(5):60-64.

荣佳星,刘文里,牛一博,等.变压器计及局部安匝不平衡时的轴向动态响应[J].哈尔滨理工大学学报,2017,22(5):52-57.

RONG Jiaxing, LIU Wenli, NIU Yibo, et al. Axial dynamic response analysis of transformer with local unbalance dampere turns[J]. Journal of Harbin University of Science and Technology, 2017,22(5):52-57.

LUO Xiao, XIAO Qianbo, WANG Qian, et al. Research on shortcircuit force of transformer winding with single-phase short-circuit and three phase short-circuit[J]. IEEE Transactions on Applied Superconductivity,22(3):5500804.

黎大健,陈梁远,潘绍明,等.一起220 kV变压器中压绕组短路冲击损坏事故分析[J].变压器,2021,58(12):64-67.

LI Dajian, CHEN Liangyuan, PAN Shaoming, et al. Analysis of 220 kV transformer MV winding short circuit fault[J]. Transformer, 2021,58(12):64-67.

黄伯云,李成功,石力开,等.中国材料工程大典—第4卷,上—有色金属材料工程[M].北京:化学工业出版社,2006.

HUANG Baiyun, LI Chenggong, SHI Likai, et al. China materials engineering canon-volume 4, part 1-nonferrous metal materials engineering[M]. Beijing:Chemical Industry Press,2006.

赵治刚.电力变压器绕组变形与短路强度研究[D].北京:华北电力大学,2020.

ZHAO Zhigang. Research on winding deformation and short circuit strength of power transformer[D]. Beijing:North China Electric Power University,2020.

燕蕾,咸日常,荣庆玉,等.绕组结构对配电变压器短路电动力的影响分析[J].变压器,2020,57(4):28-32.

YAN Lei, XIAN Richang, RONG Qingyu, et al. Effect analysis of winding structure on short-circuit force of distribution transformer[J]. Transformer,2020,57(4):28-32.

李祎春,刘文里,李军,等.电力变压器螺旋式绕组辐向短路合力的计算与分析[J].黑龙江电力,2016,38(2):135-140.

LI Yichun, LIU Wenli, LI Jun, et al. Calculation and analysis of radial short-circuit resultant force of helical winding in power transformer[J]. Heilongjiang Electric Power,2016,38(2):135-140.

徐志军.自粘换位导线整体抗弯曲试验方法研究[J].变压器, 2013,50(12):55-57.

XU Zhijun. Research on test method of radial bending test of selfbonding continuously transposed conductors[J]. Transformer, 2013,50(12):55-57.

熊汉武,张书琦,赵志刚,等.电力变压器绕组幅向弯曲应力分析方法[J].高电压技术,2020,46(3):931-938.

XIONG Hanwu, ZHANG Shuqi, ZHAO Zhigang, et al. Analysis method of radial bending stress of power transformer windings[J]. High Voltage Engineering,2020,46(3):931-938.

汪佐宪,张书琦,徐征宇,等.多因素条件下变压器自粘换位导线抗弯能力试验及评估[J].高电压技术,2022,48(9):3660-3669.

WANG Zuoxian, ZHANG Shuqi, XU Zhengyu, et al. Research and evaluation of bending resistance of epoxy continuously transposed conductors in transformers under multi-factor conditions[J].High Voltage Engineering,2022,48(9):3660-3669.

胡鹏飞,谢辉,聂伟,等.自粘导线的固化特性在变压器绕组生产中的应用[J].变压器,2022,59(7):16-18.

HU Pengfei, XIE Hui, NIE Wei, et al. Application of curing characteristics of self-adhesive wires in production of transformer windings[J]. Transformer,2022,59(7):16-18.

荆澜涛,董雪情,杨超,等.面向数字孪生应用的变压器温度场有限元降阶建模方法研究[J].高电压技术,2023,49(6):2408-2419.

JING Lantao, DONG Xueqing, YANG Chao, et al. Research on finite element reduced order modeling method of transformer temperature field for digital twin application[J]. High Voltage Engineering,2023,49(6):2408-2419.

邓祥力,朱慧,刘世明,等.适用于变压器保护的数字孪生建模技术研究[J].电网技术,2022,46(12):4982-4992.

DENG Xiangli, ZHU Hui, LIU Shiming, et al. Research on digital twin modeling technology suitable for transformer protection[J]. Power System Technology,2022,46(12):4982-4992.

王小君,窦嘉铭,刘曌,等.可解释人工智能在电力系统中的应用综述与展望[J].电力系统自动化,2024,48(4):169-191.

WANG Xiaojun, DOU Jiaming, LIU Zhao, et al. Review and prospect of explainable artificial intelligence and its application in power systems[J]. Automation of Electric Power Systems,2024,48 (4):169-191.

龙云,卢有飞,赵宏伟,等.基于数据驱动的新型电力系统潮流分析方法[J].智慧电力,2023,51(9):22-30.

LONG Yun, LU Youfei, ZHAO Hongwei, et al. New power system power flow analysis method based on data-driven[J]. Smart Power, 2023,51(9):22-30.