柔性直流支撑式换流阀摩擦摆水平隔震体系研究

杨宇萍; 梁展豪; 杨旭; 杨阿娟; 杨振宇

doi:null

您当前的位置：

首页 >

文章列表页 >

柔性直流支撑式换流阀摩擦摆水平隔震体系研究

复杂环境下变电系统地震灾变防控及应急响应研究 | 更新时间：2025-10-23

- 柔性直流支撑式换流阀摩擦摆水平隔震体系研究
- Investigation of friction pendulum horizontal isolation system for voltage sourced converter post valves
- 高压电器 2025年
- 作者机构：
  
  1.广州大学工程抗震研究中心,广东省广州市510000
  2.中国南方电网有限责任公司超高压输电公司电力科研院,广东省广州市510663
  3.昆明电器科学研究所,云南省昆明市650221
- 作者简介：
  
  [ "杨振宇（1993），男，博士，副教授，主要从事电力设备减隔震研究（）" ]
- 基金信息：
  
  广东省基础与应用基础研究基金(2023A1515010072);国家自然科学基金资助项目(52308488)
- DOI：
  中图分类号：
- 收稿：2024-12-27，
  
  修回：2025-09-03，
  
  录用：2025-09-07，
- 稿件说明：
移动端阅览
杨宇萍, 梁展豪, 杨旭, 等. 柔性直流支撑式换流阀摩擦摆水平隔震体系研究[J/OL]. 高压电器, 2025.

YANG Yuping, LIANG Zhanhao, YANG Xu, et al. Investigation of friction pendulum horizontal isolation system for voltage sourced converter post valves[J/OL]. High voltage apparatus, 2025.
杨宇萍, 梁展豪, 杨旭, 等. 柔性直流支撑式换流阀摩擦摆水平隔震体系研究[J/OL]. 高压电器, 2025. DOI：

YANG Yuping, LIANG Zhanhao, YANG Xu, et al. Investigation of friction pendulum horizontal isolation system for voltage sourced converter post valves[J/OL]. High voltage apparatus, 2025. DOI：

摘要

换流阀是柔性输电工程中的核心设备，其抗震性能是确保输电系统能够在地震作用下有效运行的关键。以某±800kV柔直支撑式换流阀为原型，采用摩擦摆隔震支座进行隔震研究，建立了换流阀—摩擦摆隔震结构等效理论模型进行参数分析，并通过有限元模型进行验证。结果表明，大宽度—小刚度的隔震顶板有利于减小支座的拉力，过大或者过小的摩擦系数都不利于减小支座的拉力和阀塔的加速度响应；增大板的刚度会放大阀塔的加速度响应，但是有利于减小阀塔的位移；考虑阀厅尺寸设计建议采用合理宽度范围的钢材隔震顶板并在支座中心配重增加初始压力以避免支座受拉和结构倾覆。

Abstract

Converter valve is the core equipment in the flexible transmission project

and its seismic performance is the key to ensure that the transmission system can operate effectively under seismic effects. Taking a ±800kV flexible supported converter valve as a prototype and adopting friction pendulum seismic isolation bearing for seismic isolation

an equivalent theoretical model of converter valve-friction pendulum seismic isolation structure was established for parameter analysis and verified by finite element model. The results show that the vibration isolation top plate with large width and small stiffness is beneficial to reduce the tensile force of the support

and the friction coefficients that are too large or too small are not conducive to reducing the tensile force of the support and the acceleration response of the valve tower

increasing the stiffness of the plate amplifies the acceleration response of the valve tower

but is beneficial to reducing the displacement of the valve tower. Considering the size of the valve hall

it is recommended to use the steel vibration isolation top plate of a reasonable width and to increase the initial pressure by weights at the center of the support to avoid support tension and structural overturning.

关键词

Keywords

references

邹常跃 , 韦嵘晖 , 冯俊杰 , 等 . 柔性直流输电发展现状及应用前景 [J ] . 南方电网技术 , 2022 , 16 ( 03 ): 1 - 7 .

Changyue Z , Ronghui W , Junjie F , et al . Development Status and Application Prospect of VSC-HVDC [J ] . Southern Power System Technology , 2022 , 16 ( 03 ): 1 - 7 .

饶宏 , 周月宾 , 李巍巍 , 等 . 柔性直流输电技术的工程应用和发展展望 [J ] . 电力系统自动化 , 2023 , 47 ( 01 ): 1 - 11 .

Hong R , Yuebin Z , Weiwei L , et al . Engineering Application and Development Prospect of VSC-HVDC Transmission Technology [J ] . Automation of Electric Power Systems , 2023 , 47 ( 01 ): 1 - 11 .

刘卫东 , 李奇南 , 王轩 , 等 . 大规模海上风电柔性直流输电技术应用现状和展望 [J ] . 中国电力 , 2020 , 53 ( 07 ): 55 - 71 .

Weidong L , Qinan L , Xuan W , et al . Application Status and Prospect of VSC-HVDC Technology for Large-Scale Offshore Wind Farms [J ] . Electric Power , 2020 , 53 ( 07 ): 55 - 71 .

谢强．电力系统的地震灾害研究现状与应急响应 [J ] . 电力建设 , 2008 , 29 ( 8 ): 1 - 6 ．

XIE Qiang ． State-of-the-art of seismic disaster research and emergency response of electric power system [J ] ． Electric Power Construction ， 2008 ， 29 ( 8 )： 1 - 6 ．

Ekstrom A. , Eklund L . HVDC Thyristor Valve Development [J ] . IEEE Transactions on Power Electronics , 1987 , PE-2( 3 ): 177 - 185 .

Larder R . -A.,Gallagher R.-P.,Nilsson B.. Innovative seismic design aspects of the Intermountain Power Project Converter Stations [J ] . IEEE Transactions on Power Delivery , 1989 , 4 ( 3 ): 1708 - 1714 .

陆军 , 谢强 . 层间铰接悬挂式换流阀塔的地震响应分析 [J ] . 高压电器 , 2020 , 56 ( 11 ): 188 - 195, 202 .

Jun L , Qiang X , College of civil engineering TU . Seismic Response Analysis of Suspended Converter Vavle with Hinged Interlayer [J ] . High Voltage Apparatus , 2020 , 56 ( 11 ): 188 - 195, 202 .

Yang Z , Xie Q , Zhou Y , et al . Seismic performance and restraint system of suspended 800 kV thyristor valve [J ] . Engineering Structures , 2018 , 169179 - 187 .

Yang ZY , Xie Q , He C . Dynamic behavior of multilayer suspension equipment and adjacent post insulators with elastic‐viscous connections [J ] . Structural Control and Health Monitoring , 2021 , 28 ( 2 ): e2662 .

杨振宇 , 谢强 , 何畅 , 等 . ±800kV特高压直流换流阀地震响应分析 [J ] . 中国电机工程学报 , 2016 , 36 ( 07 ): 1836 - 1841 .

Zhenyu Y , Qiang X , Chang H , et al . Seismic Response Analysis of ±800 kV UHVDC Converter Valves [J ] . Proceedings of the CSEE , 2016 , 36 ( 07 ): 1836 - 1841 .

刘宗辉 , 吴轶 , 蔡健 , 等 . 带悬吊阀体的大型换流站阀厅结构地震反应分析 [J ] . 建筑结构 , 2012 , 42 ( 10 ): 119 - 123 .

Zonghui L , Zhi W , Jian C , et al . Seismic response of valve-hall structure with suspended valves of large-scale converter station [J ] . Building Structure , 2012 , 42 ( 10 ): 119 - 123 .

罗皓泽 , 陈忠 , 杨为 , 等 . 压接式IGBT和晶闸管器件失效模式与机理研究综述 [J ] . 中国电力 , 2023 , 56 ( 05 ): 137 - 152 .

Haoze L , Zhong C , Wei Y , et al . Review on Failure Mode and Mechanism of Press-Pack IGBT and Thyristor Devices [J ] . Electric Power , 2023 , 56 ( 05 ): 137 - 152 .

韦文兵 , 吴轶 , 蔡健 , 等 . 大型换流站阀厅结构地震响应弹塑性分析 [J ] . 地震工程与工程振动 , 2011 , 31 ( 05 ): 113 - 120 .

Wenbing W , Zhi W , Jian C , et al . Elasto-plastic analysis of seismic responses of valve-hall structure with suspended valves of large-scale converter station [J ] . Journal of Earthquake Engineering and Engineering Vibration , 2011 , 31 ( 05 ): 113 - 120 .

Ding C , Liu YF , Pu G . Analysis of the Seismic Performance of ±500 kV Flexible DC Converter Valves [J ] . Energies 2023 , 16 ( 17 ):

郑全旭 , 孙小平 , 娄彦涛 , 等 . ±500 kV海上柔直换流阀轻型化设计及仿真分析 [J ] . 高压电器 , 2023 , 59 ( 06 ): 188 - 201 .

Quanxu Z , Xiaoping S , Yantao L , et al . Lightweight Design and Simulation Analysis of ±500 kV Offshore VSC Converter Valve [J ] . High Voltage Apparatus , 2023 , 59 ( 06 ): 188 - 201 .

Yu Jiangsheng , Zeng Wei , Fan Jianbin , et al . Research on Strengthening Structure of Converter Valve Tower in High Seismic Intensity Area [C ] // IEEE: IEEE , 2022 .

Ersoy S , Saadeghvaziri MA , Liu G , et al . Analytical and Experimental Seismic Studies of Transformers Isolated with Friction Pendulum System and Design Aspects [J ] . Sage Publications , 2001 , 17 ( 4 ): 569 - 595 .

Murota N , Feng M , Liu G . Earthquake Simulator Testing of Base-isolated Power Transformers [J ] . Institute of Electrical and Electronics Engineers (ieee) , 2006 , 21 ( 3 ): 1291 - 1299 .

Enblom R. , Coad J . N.O.,Berggren S.. Design of HVDC converter station equipment subject to severe seismic performance requirements [J ] . Institute of Electrical and Electronics Engineers (IEEE) , 1993 , 8 ( 4 ): 1766 - 1772 .

李爱群 , 张瑞君 , 徐刚 , 等 . 橡胶隔震支座温度相关性的研究进展 [J ] . 建筑结构学报 , 2021 , 42 ( 07 ): 1 - 11 .

Aiqun L , Ruijun Z , Gang X , et al . Research progress on temperature dependence of rubber isolation bearings . Journal of Building Structures , 2021 , 42 ( 07 ): 1 - 11 .

杨加瑜 . 低温下隔震橡胶支座的力学性能变化及对隔震结构地震响应的影响 [D ] : 昆明理工大学 , 2021 .

Jiayu Y . Changes in Mechanical Properties of Vibration-isolated Rubber Bearings at Low Temperatures and Their Influence on Seismic Response of Vibration-isolated Structures [D ] : kunming university of science and technology , 2021 .

刘文光 , 于维欣 , 秦川 , 等 . 核电厂隔震支座硬化模型及其对结构地震响应的影响分析 [J ] . 振动与冲击 , 2017 , 36 ( 18 ): 85 - 90 .

LIU Wenguang ， YU Weixin ， QIN Chuan , et al . Hardening model for lead rubber bearings of base-isolated nuclear power plants and its influence on structural seismic responses . Journal of Vibration and Shock , 2017 , 36 ( 18 ): 85 - 90 .

余文正 , 孙柏锋 , 张然 , 等 . 隔震结构高宽比及支座竖向力分析 [J ] . 土木工程与管理学报 , 2023 , 40 ( 01 ): 54 - 63 .

Wengzheng Y , Baifeng S , Ran Z , et al . Study on Height-Width Ratio of Isolated Structure and Vertical Force of Bearing [J ] . Journal of Civil Engineering and Management , 2023 , 40 ( 01 ): 54 - 63 .

刘文光 , 程颖 , 李韶平 , 等 . 核电厂隔震支座的受拉临界理论与结构振动台试验研究 [J ] . 振动与冲击 , 2019 , 38 ( 14 ): 153 - 160 .

Wenguang L , Ying C , Shaoping L , et al . Theoretical analysis of bearings in tension and shaking table tests on a base-isolated nuclear power plant structure [J ] . Journal of Vibration and Shock , 2019 , 38 ( 14 ): 153 - 160 .

贺拥军 , 陈兴发 , 马义飞 , 等 . 新型摩擦摆支座理论与有限元分析 [J ] . 中国科技论文 , 2021 , 16 ( 02 ): 181 - 187, 192 .

Yongjun H , Xingfa C , Yifei M , et al . Theoretical and finite element analysis of new friction pendulum bearing support [J ] . China Sciencepaper , 2021 , 16 ( 02 ): 181 - 187, 192 .

中华人民共和国国家标准 . GB/T37358-2019建筑摩擦摆隔震支座 [J ] . 2019

National standard of the People 's Republic of China . GB / T37358-2019 Friction pendulum isolation bearings for Building [S ] . 2019

Pacific Earthquake Engineering Research Center (PEER) , PEER Ground Motion Database , available at https://ngawest2.berkeley.edu/ (last accessed 12 June 2019) https://ngawest2.berkeley.edu/(lastaccessed12June2019) .[ J] .

中华人民共和国国家标准 . GB50260-2013 电力设施抗震设计规范 [S ] . 2013 .

National standard of the People's Republic of China . GB50260-2013 Code for seismic design of electrical installations [S ] . 2013 .

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

暂无数据