控制SF<sub>6</sub>灭弧室摩擦阻力以改善断路器产品制造质量

曹永进; 彭翔; 吴鹏; 杭飞

doi:10.13296/j.1001-1609.hva.2016.02.031

您当前的位置：

首页 >

文章列表页 >

控制SF₆灭弧室摩擦阻力以改善断路器产品制造质量

技术讨论 | 更新时间：2025-04-26

- 控制SF₆灭弧室摩擦阻力以改善断路器产品制造质量
- Controlled Frictional Resistance of SF₆ Arc Extinguishing Chamber to Improve Manufacturing Quality of the Circuit Breaker Product
- 高压电器 2016年52卷第2期页码：191-194+199
- 作者机构：
  
  1. 国家电网天津城南供电分公司
  2. 江苏省如高高压电器有限公司
- 作者简介：
- 基金信息：
- DOI：10.13296/j.1001-1609.hva.2016.02.031
  中图分类号： TM561
- 纸质出版日期：2016
- 稿件说明：
移动端阅览
[1]曹永进,彭翔,吴鹏,杭飞.控制SF_6灭弧室摩擦阻力以改善断路器产品制造质量[J].高压电器,2016,52(02):191-194+199.

CAO Yongjin, PENG Xiang, WU Peng, et al. Controlled Frictional Resistance of SF₆ Arc Extinguishing Chamber to Improve Manufacturing Quality of the Circuit Breaker Product[J]. High voltageapparatus, 2016, 52(2): 191-194+199.
[1]曹永进,彭翔,吴鹏,杭飞.控制SF_6灭弧室摩擦阻力以改善断路器产品制造质量[J].高压电器,2016,52(02):191-194+199. DOI： 10.13296/j.1001-1609.hva.2016.02.031.

CAO Yongjin, PENG Xiang, WU Peng, et al. Controlled Frictional Resistance of SF₆ Arc Extinguishing Chamber to Improve Manufacturing Quality of the Circuit Breaker Product[J]. High voltageapparatus, 2016, 52(2): 191-194+199. DOI： 10.13296/j.1001-1609.hva.2016.02.031.

摘要

对某型SF6高压断路器产品灭弧室的摩擦阻力进行了理论计算

实际测量了该摩擦阻力

分析找出了影响灭弧室摩擦阻力的因素并发现此因素对产品操作功也有重大影响。通过对该因素的改善

降低了机构的操作功

说明了将灭弧室的摩擦阻力作为产品装配制造过程的控制点能有效改善产品装配质量

提高产品寿命。

Abstract

The frictional resistance of a certain type of SF6 high voltage circuit breaker’s arc extinguishing chamber were calculated and measured. The factor influencing the frictional resistance were analyzed and identified. It was found that the factors also exert significant effects on the mechanical work of the circuit breaker. By improving the factor the mechanical work was reduced

which indicates that control of the frictional resistance of arc extinguishing chamber during the product assembly process can effectively improve the product assembly quality and prolong the product life.

关键词

Keywords

references

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

SF₆压气式断路器喷口堵塞现象的计算分析

SF₆断路器稳态温升的研究

旋弧式SF₆断路器开断高压直流电流性能的实验研究

SF₆旋转电弧的重燃和弧后介质恢复的试验研究

SF₆断路器电耐受能力的研究

控制SF6灭弧室摩擦阻力以改善断路器产品制造质量

Controlled Frictional Resistance of SF6 Arc Extinguishing Chamber to Improve Manufacturing Quality of the Circuit Breaker Product

DOI：10.13296/j.1001-1609.hva.2016.02.031

摘要

Abstract

关键词

Keywords

references

控制SF₆灭弧室摩擦阻力以改善断路器产品制造质量

Controlled Frictional Resistance of SF₆ Arc Extinguishing Chamber to Improve Manufacturing Quality of the Circuit Breaker Product