Development of Wireless Sensing System on the Contacts Overheating in GIS

LI Shuang; LU Xuchen; TANG Hong; TANG Jianeng; CUI Wenjun

doi:10.13296/j.1001-1609.hva.2024.05.004

您当前的位置：

首页 >

文章列表页 >

Development of Wireless Sensing System on the Contacts Overheating in GIS

Research & Analysis | 更新时间：2025-04-26

- Development of Wireless Sensing System on the Contacts Overheating in GIS
- High Voltage Apparatus Vol. 60, Issue 5, Pages: 31-38(2024)
- 作者机构：
  
  国网辽宁省电力有限公司电力科学研究院，沈阳　 110006
- 作者简介：
- 基金信息：
  
  Youth Innovation Project of State Grid Liaoning Electric Power Co., Ltd.(2022YF-101)
- DOI：10.13296/j.1001-1609.hva.2024.05.004
  CLC：
- Received：19 January 2024，
  
  Revised：17 March 2024，
  
  Published：16 May 2024
- 稿件说明：
移动端阅览
LI Shuang, LU Xuchen, TANG Hong, et al. Development of Wireless Sensing System on the Contacts Overheating in GIS[J]. High voltage apparatus, 2024, 60(5): 31-38.
DOI：

LI Shuang, LU Xuchen, TANG Hong, et al. Development of Wireless Sensing System on the Contacts Overheating in GIS[J]. High voltage apparatus, 2024, 60(5): 31-38. DOI： 10.13296/j.1001-1609.hva.2024.05.004.

摘要

为了实现72.5 kV及以上电压GIS内触头温度的无线感知，文中阐述了一套GIS内触头温度无线感知系统的设计思

路，并进行了研制。通过功能性试验，验证了本系统的有效性和可行性。最后，建立了252 kV GIS角型隔离开关接触良好和接触不良工况模型，开展了一系列局部过热无线感知试验。试验数据与热电偶测试数据进行了对比，验证了本系统的可信性。试验结果表明：本系统能够实现GIS内部触头温度的无线感知；当接触电阻

250 μΩ，动触头及静触头座的温度上升较快；当

达到620 μΩ，负荷电流600 A时，静触头座的温度已接近50 ℃，可勉强通过红外成像检出；当Rj达到1.8 mΩ，负荷电流大于400 A时，触头的温度一直在增长，可通过红外成像清晰检测。

Abstract

For achieving the wireless sensing of contact temperature in GIS at 72.5 kV and above

the design idea of a set of wireless sensing system for contact temperature in GIS is described and developed in this paper. The effectiveness and feasibility of the system are verified through functional test. Finally

a working condition model of 252 kV GIS angle disconnector with good and weak contact is set up

and a series of local overheating wireless sensing tests are performed. The reliability of the system is verified by comparing the test data with the thermocouple test data. The test result shows that the system can achieve the wireless sensing of GIS internal contact temperature; When the contact resistance

250 μΩ

the temperature of moving contact and fixed contact base rises rapidly; When Rj reaches 620 μΩ and the load current is 600 A

the temperature of the fixed contact base is close to 50 ℃

which can be barely detected by infrared imaging; When

reaches 1.8 mΩ and the load current is higher than 400 A

the contact temperature is growing all the time

which can be clearly detected by infrared imaging.

关键词

Keywords

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Study on contact characteristics and melting mechanism of inclined coil spring contact

On the Problems of Contact Resistance Models and Their Applications in Electric Contacts

Finding of a Hidden Fault and Suggestion

Design of Spring Contact（Ⅱ）

Control of Contact Resistance of Main Bus-bar Circuit for GIS

Related Author

MA Yongfu

BAO Zhenghong

REN Jiyun

WANG Lili

WANG Zhihui

CHEN Yao

Chen Lichun

WU Bin

Related Institution

State Grid Qinghai Electric Power Research Institute

华中理工大学

Shapingba Power Supply Bureau

Shannxi Victory Eiectric Co.Ltd.

Xi′an XD Switchgear Electric Co.,Ltd.,Xi′an

⁰