SHI Hui, QIAN Yuhao, LI Yufei, et al. Modelling Characteristic Analysis and Layout/Field Testing Scheme for Heat Generation in Electrical Equipment of 110 kV Modular Substation[J]. High Voltage Apparatus, 2026, 62(2): 50-59.
DOI:
SHI Hui, QIAN Yuhao, LI Yufei, et al. Modelling Characteristic Analysis and Layout/Field Testing Scheme for Heat Generation in Electrical Equipment of 110 kV Modular Substation[J]. High Voltage Apparatus, 2026, 62(2): 50-59. DOI: 10.13296/j.1001-1609.hva.2026.02.007.
Modelling Characteristic Analysis and Layout/Field Testing Scheme for Heat Generation in Electrical Equipment of 110 kV Modular Substation
110 kV modular substation adopts a modular construction approach
featuring standardization
factory prefabrication and intensive design
making it the preferred construction model for smart substations.110 kV modular substation in operation is affected by the difference of climate environment in different regions
and the problem of heat accumulation and condensation of electrical equipment is existed
which affect seriously both life
safe and stable operation of the electrical equipment. In this paper
the heat generation characteristics of 110-A2-6 modular substations and their electrical equipment in Jiangsu province are taken as the research subject. The heat generation characteristics of such main electrical equipment as transformers
capacitors
switchgear
GIS are modelled and analyzed
and the heat generation patterns of the electrical equipment in modular substations are obtained. Finally
the method of placing loop control sensors is introduced in the 110 kV modular substation
and the measured data is matched with the heat generation model
thus providing a reference basis for the improvement of the heat and humidity environment in the modular substation.
关键词
Keywords
references
林文静.基于模块化技术的智能变电站设计[D].济南:山东大学,2021.
LIN Wenjing. Design of intelligent substation based on modular technology[D]. Jinan:Shandong University, 2021.
YAN Yan, JIANG Yongsheng. Research on the overall optimization of urban intelligent substation based on modular design[J]. Shanxi Architecture, 2020, 46(1):57-59.
GUO Jia, XIE Jinghai, SUN Mi, et al. A lightweight construction method for substation digital twin[J]. Electrical Measurement &Instrumentation, 2025, 62(4):130-140.
HU Jinsong, SHI Gaiping, KONG Xiangyu, et al. Analysis of influences of new technology on modular intelligent substation design and suggestions[J]. Proceedings of the CSU-EPSA, 2020, 32 (3):107-112.
WANG Liuhuo, SUN Shuai, WANG Zengbin, et al. Numerical simulation of temperature/humidity field and condensation in substation equipment cabinet[J]. High Voltage Apparatus, 2020, 56(1):24-29.
董文坚,赵法.开关柜凝露因素试验分析[J].电工技术,2020 (22):147-148.
DONG Wenjian, ZHAO Fa. Test analysis of condensation factors in switchgear[J]. Electric Engineering, 2020(22):147-148.
MEN Qiang, LIU Tao, ZHANG Jun, et al. Remote intelligent test method and application of relay protection of smart substation based on autonomous controllable technology[J].Electrical Measurement & Instrumentation, 2025, 62(5):185-192.
JI Peng, LI Yinghua, LI Yang, et al. Research on generating secondary safety measure ticket for intelligent substation based on fuzzy learning[J].Electrical Measurement & Instrumentation, 2025, 62(6):186-193.
YUE Guohua, DU Zhiye, MENG Shengchun, et al. Analysis and optimization of non-uniform temperature rise distribution of drytype DC capacitor based on electro-thermal coupling[J]. High Voltage Engineering, 2022, 48(12):4915-4924.
XU Qingchao, XU Qiangchao, ZHANG Min, et al. Analysis and optimal design of the internal loss ofSTATCOM DC-side capacitor[J]. Power Electronics, 2021, 55(3):39-43.
李汉伟.基于ANSYS的中压开关柜温度场建模及热分析[D].上海:上海工程技术大学,2020.
LI Hanwei. Temperature field modeling and thermal analysis of medium voltage switchgear based onANSYS[D]. Shanghai:Shanghai University of Engineering Science, 2020.
LIU Yuming, CUI Chen, SUN Yanzhi, et al. Research on routing strategy of wireless sensor network in intelligentsubstation based on improved EEUC algorithm[J].Electrical Measurement &Instrumentation, 2025, 62(7):99-105.
HUANG Mengdan, XIAO Chun, YANG Zhining, et al. Research progress of GIS equipment heating[J]. High Voltage Apparatus, 2020, 56(12):24-33.
殷浩洋.应用石墨烯复合材料的油浸式变压器温度场数值研究[D].北京:华北电力大学,2020.
YIN Haoyang. Numerical research on temperature field of oilimpressed transformer using graphite composite materials[D]. Beijing:North China Electric Power University, 2020.
WANG Chenxu, LI Yonghua, PENG Zhimin. Simulation of temperature flow field in high voltage switchgear[J]. Advanced Technology of Electrical Engineering and Energy, 2021, 40(11):64-71.
JI Lipeng, ZHEN Li, LIU Hongliang, et al. Finite element numerical calculation of butt contact in high voltage switchgear based on magnetic-temperature field coupling[J]. China Measurement &Testing Technology, 2022, 48(6):8-12.
GONG Kai, XIAO Huangqing, ZHANG Zhan, et al. Adaptive hybrid synchronization control of grid-connected converters in renewable power plants and its small-signal stability analysis[J].Zhejiang Electric Power, 2024, 43(11):3-14.
SHU Shengwen, XU Junwei, ZHAN Zhaoxuan, et al. Condensation development characteristics and heater arrangement method of 40.5 kV switchgear under high humid environment[J]. High Voltage Engineering, 2023, 49(2):493-504.
TANG Qiang, YANG Yi, WEI Miao, et al. Multiphysics analysis on KYN61-40.5kV high voltage switchgear and study of insulation test of component[J]. High Voltage Apparatus , 2021 , 57(12):33-41.
GU Zebo, ZHAO Xueru, GUO Li. Current situation and progress of research on condensation in switchgear[J]. Mechanical & Electrical Engineering Technology, 2022, 51(4):25-29.
LIU Yanan, SHU Naiqiu, LI Yanzhang, et al. Temperature-rise calculation of GIS disconnecting switch based on equivalent thermalcircuit model[J]. Electrical Measurement & Instrumentation, 2017, 54(19):7-12.
WANG Hao, BAI Zhang, WU Jinsong, et al. Research on temperature rise characteristics of medium voltage gas-filled switchgear in high altitude areas[J].Electrical Measurement & Instrumentation, 2025, 62(11):88-94.