DESIGN AND RESEARCH OF INSTALLATION DIAMETER OF POST INSULATOR FOR DRY-TYPE AIR-CORE REACTOR
|更新时间:2025-05-26
|
DESIGN AND RESEARCH OF INSTALLATION DIAMETER OF POST INSULATOR FOR DRY-TYPE AIR-CORE REACTOR
Moren Journal(2025)
作者机构:
天津经纬正能电气设备有限公司,天津市天津市300350
作者简介:
基金信息:
DOI:
CLC:
Received:15 October 2024,
Revised:04 March 2025,
Accepted:09 April 2025,
稿件说明:
移动端阅览
ZHANG Zhiwei, WU Yukun, LUO Fuquan, et al. DESIGN AND RESEARCH OF INSTALLATION DIAMETER OF POST INSULATOR FOR DRY-TYPE AIR-CORE REACTOR[J/OL]. Moren journal, 2025.
DOI:
ZHANG Zhiwei, WU Yukun, LUO Fuquan, et al. DESIGN AND RESEARCH OF INSTALLATION DIAMETER OF POST INSULATOR FOR DRY-TYPE AIR-CORE REACTOR[J/OL]. Moren journal, 2025.DOI:
DESIGN AND RESEARCH OF INSTALLATION DIAMETER OF POST INSULATOR FOR DRY-TYPE AIR-CORE REACTOR
To enhance the stability of the support system for dry-type air-core reactors and ensure that the post insulators can withstand compressive loads as much as possible while reducing bending loads
a method of positioning the installation diameter of post insulators based on the principle of moment balance is presented. Firstly
the main coil is cut in half along the central axis
taking the main coil after the half cut as the research object
the coil is spread out
and then the moment equilibriums theory is used to calculate the installation diameter. By comparing the differences in calculated values between the centroid characteristics of 3D modeling software and the moment equilibriums theory
the influence of spreader bar on the installation diameter value is analyzed. Taking a type of UHV dry-type air-core reactor as the research object
the finite element simulation method is used to check the validity of the proposed method under the action of dead weight and earthquake respectively. The results show that under the effect of dead load
the theoretical prediction values based on the moment equilibriums theory proposed in this paper have high accuracy. Under the action of earthquakes
there is a slight deviation between the theoretical prediction values and simulated values by FEM. Based on modal calculations
the reasons for the slight deviation were further analyzed
providing a reference direction for subsequent optimization.
SUN Yong , LIU Qingsong , GU Yu , et al . Design Method of Bridge Arm Reactor for ±800 kV UHV Flexible DC [J ] . High Voltage Apparatus , 2023 , 59 ( 11 ): 217 - 223 .
LIU Rushan , SHU Rongxing , XIONG Mingpan . Vulnerabili⁃ ty study for high voltage electrical equipment in substations [J ] . Journal of Natural Disasters , 2018 , 27 ( 1 ): 9 ⁃ 16 .
Technical specification for seismic design of ultra⁃high volt⁃ age porcelain insulating equipments and installation/ main⁃ tenance to energy dissipation devices : Q/GDW 11132— 2013 [S ] . 2013 .
YU Yongqing , LI Guangfan , LI Peng , et al . Investigation and analysis of electric equipment damage in Sichuan pow⁃ er grid caused by Wenchuan earthquake [J ] . Power System Technology , 2008 , 32 ( 11 ): 1 ⁃ 6
YANG Shaoyong , ZHAO Jianguo . An overview on preven⁃ tion technology of earthquake disaster for power grids [J ] . Power System Technology , 2010 , 34 ( 8 ): 57 ⁃ 63 .
LAI Wuihuang , XIE Qiang , LI Xiaoxuan , et al . Comparative analysis on seismic performance of DC filter coupling loops with different structural forms [J ] . High Voltage Apparatus , 2021 , 57 ( 7 ): 135 ⁃ 143 .
SUN Bangxin , CAO Meigen . Aseismic Design and Capability Assessment of DC Yard Equipment for UHV Xinsong Converter Station [J ] . High Voltage Apparatus , 2018 , 54 ( 12 ): 24 - 35 .
ZHANG Jun , QI Lizhong , LI Kewen . et al . Shock test and fi⁃ nite element analysis of porcelain high ⁃ voltage electrical equipment [J ] . Electric Power Construction , 2011 , 32 ( 7 ): 6 ⁃ 10 .
YU Yuezhong , SU Kuojun , WU Guijun , et al . Shake table test research on seismic performance of 110 kV composite material dry type of reactor [J ] . Building Structure , 2016 , 46 (s 2 ): 262 ⁃ 266 .
ZHANG Xuesong , DAI Zebing , CAO Meigen , et al . Coeffi⁃ cient of bending stiffness of interconnected parts between ultra ⁃ high voltage porcelain bushings and flanges [J ] . Engi⁃ neering Journal of Wuhan Universiy , 2014 , 47 ( 6 ): 794 ⁃ 799 .
曾 攀 . 有限元分析及应用 [M ] . 北京 : 清华大学出版社 , 2004 .
ZENG Pan . Finite element analysis and application [M ] . Bei⁃ jing : Tsinghua University Press , 2004 .