narrow band detection and ultrawide band(UWB)detection
are generally applied in partial discharge (PD) measurement.It will help to achieve more reliable and useful information and higher signal to noise ratio with UWB detection than narrow band detection.Whereas
it has been abundant experience with narrow band detection
so it is a good idea to detect PD simultaneously with narrow and ultrawide band method. Moreover
based on the relations between the detected results of the two techniques
it will help to use the research results effectively that already existed. Rejecting and suppressing on site interference is the precondition of PD measurement. Some measures of interference rejection are given in this paper.
Research on Application of Microphone-optimized Spiral Arrays-based Acoustic Imaging Devices in Partial Discharge Localization
Study on Fiber Interferometric Partial Discharge Ultrasonic Sensing Method Based on Acoustic-optic Modulation and RF Phase Detection
High-frequency Sensing Technology of Partial Discharge of Switchgear Cabinet for Wind Solar & Energy Storage Stations in Gobi Deserts
Research on Influence of Piezoelectric Material Properties and Element Size on Sensitivity of Piezoelectric Sensor for Partial Discharge Monitoring of Transformer
Influence of Environmental Factors on Insulation Performance of Separable Connector for 12 kV Gas Filling Switchgear Cabinet
Related Author
YUE Song
GAO Fei
HAN Shuai
DONG Haoyuan
LI Jun
LI Xin
LIU Chao
QIAO Hui
Related Institution
Electric Power Research Institute of State Grid Tibet Company
China Electric Power Research Institute Co., Ltd.
Iflytek Co., Ltd.
Electric Power Research Institute, State Grid Hebei Electric Power Co., Ltd.
State Key Laboratory of Alternate Electrical Power System with Renewable Energy Sources, North China Electric Power University