Experiment on Shielding Material with High Electron Emission Threshold

WU You-cheng1; WANG Meng1; YANG Yu1; GENG Li-dong1; YANG Jian2

doi:10.13296/j.1001-1609.hva.2010.10.006

您当前的位置：

首页 >

文章列表页 >

Experiment on Shielding Material with High Electron Emission Threshold

更新时间：2025-04-26

- Experiment on Shielding Material with High Electron Emission Threshold
- High VoltageApparatus Vol. 46, Issue 10, Pages: 23-26+31(2010)
- 作者机构：
  
  1. 中国工程物理研究院流体物理研究所
  2. 北京有色金属研究总院
- 作者简介：
- 基金信息：
- DOI：10.13296/j.1001-1609.hva.2010.10.006
  CLC： TM85
- Published：2010
- 稿件说明：
移动端阅览
[1]伍友成,王勐,杨宇,耿力东,杨剑.高阈值场发射屏蔽材料电性能实验研究[J].高压电器,2010,46(10):23-26+31.

WU You-cheng1, WANG Meng1, YANG Yu1, et al. Experiment on Shielding Material with High Electron Emission Threshold[J]. High voltageapparatus, 2010, 46(10): 23-26+31.
[1]伍友成,王勐,杨宇,耿力东,杨剑.高阈值场发射屏蔽材料电性能实验研究[J].高压电器,2010,46(10):23-26+31. DOI： 10.13296/j.1001-1609.hva.2010.10.006.

WU You-cheng1, WANG Meng1, YANG Yu1, et al. Experiment on Shielding Material with High Electron Emission Threshold[J]. High voltageapparatus, 2010, 46(10): 23-26+31. DOI： 10.13296/j.1001-1609.hva.2010.10.006.

摘要

高域值场发射屏蔽材料为采用特殊工艺在不锈钢等金属材料表面覆盖一层绝缘薄膜

使金属表面的场致电子发射域值提高

有效防止金属材料表面局部场强过高导致电击穿的现象发生。为了检验和测试该屏蔽材料的实际性能

设计了屏蔽材料场发射域值的测试方案

采用电流测量方法判断经过屏蔽材料处理后的阴极头是否有电子发射

并通过阴极头的电压测试确定阴极头发射电子时的电压

通过数值模拟计算确定阴极头的发射域值。构建了实验测试平台

采用1 MV/100 kA电子加速器作为高压脉冲功率源

以平面二极管作为负载

二极管阴极头为实验样品。实验中分别测试了普通不锈钢阴极头的场发射域值和经过屏蔽材料处理后阴极头场发射域值

结果表明

普通不锈钢阴极头的场发射域值在450 kV/cm附近

而经过特殊工艺处理后的阴极头场发射域值在630 kV/cm附近

场发射域值约提高40%。

Abstract

The shielding material with high electron emission threshold is a kind of dielectric film

which is planted on the surface of metal by special method.It can enhance electron emission threshold of the metal’s surface in order to prevent high voltage pulse breakdown.For investigating the capability of shielding material

the scheme of experiment study on the shielding material is made.The current of the diode is taken as the evidence for judging the electron emission.The electric field when the electron is emitting first from the diode is taken as the emission threshold.The electron accelerator（1 MV/100 kA） is as the experiment’s pulsed power source

the plane diode is as the load

the diode cathode is as studying object.In the experiment common steel cathode and the cathode with shielding material are tested.The results show that the emission threshold of common steel cathode is near to 450 kV/cm and the threshold of the cathode with shielding material is about 630 kV/cm.So the shielding material can increase the electron emission threshold of metal’s surface

obviously 40%.

关键词

Keywords

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Generation of Non-Oscillating Steep Fronted Impulses for VFTO Tests of CIS

Surface Microstructure Features of CuCr Contacts After Conditioning

Dielectric Strength of SF6-He and SF6-Ne Mixtures

The Breakdown Characteristics of SF₆ Gas in Non-uniform Field Gap under Combined DC and Impulse Voltages

A Method for Calculating SF₆ Insulating Characteristics under Impulse Voltage

Related Author

陆昶羿

张镁同

邱毓昌

杨志懋

严群

丁秉钧

王笑天

肖登明

Related Institution

西安交通大学 710049

西安交通大学

清华大学北京 100084

清华大学

重庆大学 400044

⁰