Fault Current Limiter Based on Current Commutation at Power Frequency Zero and Simulation of 40.5 kV Fast Vacuum Switch

LIU Jia-yu; GUAN Yong-gang; LIU Wei-dong

doi:10.13296/j.1001-1609.hva.2010.11.017

您当前的位置：

首页 >

文章列表页 >

Fault Current Limiter Based on Current Commutation at Power Frequency Zero and Simulation of 40.5 kV Fast Vacuum Switch

更新时间：2025-04-26

- Fault Current Limiter Based on Current Commutation at Power Frequency Zero and Simulation of 40.5 kV Fast Vacuum Switch
- High VoltageApparatus Vol. 46, Issue 11, Pages: 16-20(2010)
- 作者机构：
  
  清华大学电机系电力系统及发电设备控制和仿真国家重点实验室
- 作者简介：
- 基金信息：
- DOI：10.13296/j.1001-1609.hva.2010.11.017
  CLC： TM564
- Published：2010
- 稿件说明：
移动端阅览
[1]刘家妤,关永刚,刘卫东.工频零点电流转移限流及40.5kV快速真空开关仿真[J].高压电器,2010,46(11):16-20.

LIU Jia-yu, GUAN Yong-gang, LIU Wei-dong. Fault Current Limiter Based on Current Commutation at Power Frequency Zero and Simulation of 40.5 kV Fast Vacuum Switch[J]. High voltageapparatus, 2010, 46(11): 16-20.
[1]刘家妤,关永刚,刘卫东.工频零点电流转移限流及40.5kV快速真空开关仿真[J].高压电器,2010,46(11):16-20. DOI： 10.13296/j.1001-1609.hva.2010.11.017.

LIU Jia-yu, GUAN Yong-gang, LIU Wei-dong. Fault Current Limiter Based on Current Commutation at Power Frequency Zero and Simulation of 40.5 kV Fast Vacuum Switch[J]. High voltageapparatus, 2010, 46(11): 16-20. DOI： 10.13296/j.1001-1609.hva.2010.11.017.

摘要

随着电网的发展和负荷密度的增加

故障电流不断增大

如不采取措施

一些区域的故障电流将超过现有断路器的开断能力。笔者提出了一种基于工频零点电流转移的限流器方案。由快速真空开关和限流阻抗并联组成限流器

放弃限制故障电流的第一个峰值

降低了限流器实现的难度。笔者从工作电压、电流转移、动稳定性和热稳定性

以及快速真空开关等方面

论证了这种限流器的可行性。建立了基于等效回路法的仿真分析方法

对40.5kV真空断路器的电磁斥力机构进行了计算和优化。结果表明

工频零点电流转移型限流器所需的快速真空开关是可以实现的。

Abstract

With the development of power grid and the increase of load density

fault current gets larger to break the interruption capacity of the existing circuit breakers in some areas if countermeasure is not taken.This paper presented a fault current limiter （FCL） scheme based on current commutation at power frequency zero.The FCL is composed of a fast vacuum switch and a fault current limiting impedance connected in parallel.This scheme ignores limiting the first peak of fault current so as to simplify the implementation of FCL.Investigations on the issues of working voltage

current commutation

dynamic stability

thermal stability and fast vacuum switch were performed to demonstrate the feasibility of the FCL.A simulation method based on the equivalent circuit method was proposed to optimize electromagnetic repulsion mechanism for a 40.5 kV vacuum circuit breaker.The simulation results show that the fast vacuum switch for the FCL is realizable.

关键词

Keywords

references

Views

254

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Fault Arc Protection Method for Switchgear Cabinet Using Fast Earthing Switch

Research and Development on 72.5 kV Fast Vacuum Circuit Breaker Technology

Efficiency Optimization Analysis of 110 kV Double-break Fast Switch

Study on Transient Process of Closing Contact Bounce of Fast Vacuum Switch

Design Simulation and Optimization of Fast Electromagnetic Repulsion Mechanism for Mechanical DC Circuit Breaker

Related Author

CHEN Zehao

DAN Shuheng

YAO Xiaofei

GENG Yingsan

WANG Jianhua

LIU Zhiyuan

LIU Yang

GUAN Chen

Related Institution

Department of Electrical Engineering, Shanghai University of Electric Power

State Key Laboratory of Electrical Insulation and Power Equipment, Xi'an Jiaotong University

Henan Senyuan Electric Co., Ltd.

NR Electric Power Electronics Co, Ltd

Qixian Power Supply Company, State Grid Henan Electric Power Co, Ltd

⁰