LI Hui, CHEN Jiangbo, ZHANG Xi, et al. Calibration of UHF Sensor for Detection of Partial Discharge in Transformer[J]. High voltageapparatus, 2014, 50(1): 7-13.
LI Hui, CHEN Jiangbo, ZHANG Xi, et al. Calibration of UHF Sensor for Detection of Partial Discharge in Transformer[J]. High voltageapparatus, 2014, 50(1): 7-13. DOI: 10.13296/j.1001-1609.hva.2014.01.002.
Calibration of UHF Sensor for Detection of Partial Discharge in Transformer
An installation kit of the ultra-high-frequency(UHF)sensor for detecting partial discharge(PD)in a transformer
an adjustable artificial nanosecond pulse source
a transformer PD fault simulation device
and some analogue electrodes of defects were designed to calibrate the sensitivity of the UHF sensor and to test the detection range in laboratory. This calibration method can also be used to test the UHF sensor’s detection performance of PD in a transformer on site after installation. The on-site UHF sensor test method was verified with the transformer simulation tool-kit in laboratory.
Research on Influence of Piezoelectric Material Properties and Element Size on Sensitivity of Piezoelectric Sensor for Partial Discharge Monitoring of Transformer
Study and Design of Rogowski Coil for Partial Discharge Signal Measurement
Research on Oil Tank Seam Type Detection Method for Partial Discharge of Transformer
THE PROGRAM DEVELOPMENT OF PD LOCATION SYSTEM USED IN LARGE-SIZE TRANSFORMER
Elimination of "Large Pulse" Existing during Partial Discharge Test for Transformer
Related Author
WANG Yan
CHEN Chuan
LIU Yongbin
GAO Jinghui
ZHU Jiayi
CHEN Guifeng
LUO Zheng
FANG Chunhua
Related Institution
Department of Electric Power Sensing Technology, Global Energy Interconnection Research Institute Co., Ltd.
State Key Laboratory of Electrical Insulation and Power Equipment, Xi’an Jiaotong University
Hubei Provincial Engineering Technology Research Center for Power Transmission Line, China Three Gorges University
College of Electricity and New Energy, China Three Gorges University