SHAO Xianjun, HE Wenlin, SHI Huajun, et al. Experimental and Simulation Research on GIS Partial Discharge Detection Characteristics of UHF Sensors[J]. High voltageapparatus, 2015, 51(1): 46-55.
SHAO Xianjun, HE Wenlin, SHI Huajun, et al. Experimental and Simulation Research on GIS Partial Discharge Detection Characteristics of UHF Sensors[J]. High voltageapparatus, 2015, 51(1): 46-55. DOI: 10.13296/j.1001-1609.hva.2015.01.009.
Experimental and Simulation Research on GIS Partial Discharge Detection Characteristics of UHF Sensors
A 252 k V GIS partial discharge experimental platform was built.The inner grading electrode inside the insulating spacer
designed as an extractor-type loop UHF sensor
was combined with the internal and external UHF sensors to investigate their frequency responses and partial discharge(PD) detection characteristics.Four typical insulation defects
such as metal protrusion on high-voltage conductor
floating potential
metal shim left on the
fringe of spacer
and free particles
were selected for the investigation
and the PD development features under different applied voltage amplitudes were discussed.It is shown that the working frequency ranges of the internal sensor
external sensor
and extractor type loop UHF sensor are
<
1.5 GHz
500 MHz
1
.5 GHz and
<
1 GHz
respectively
and the extractor type loop UHF sensor gains the highest detection sensitivity at about 400 MHz.The detection results of different defects PD show that the metal protrusion PD on high-voltage conductor can be divided into the negative corona dominated stage
the coexistence stage of positive and negative corona
the positive corona dominated stage
and the "rabbit ears"shape stage according to the PRPD and PD severity level
and the space charge around the protrusion is considered the dominant role during the stage transition.The floating potential defect PD transits gradually from the protrusion discharge stage to typical floating discharge with symmetrical discharge amplitude
density and phase.The PD of the metal shim left on fringe of spacer transits from the quasi floating discharge into critical flashover state.The free particles PD can be divided into "jump"
"dance"
and "shuffling"stages and the PD is centralized around the zero-crossing point of applied voltage.For the defects of metal protrusion on high voltage conductor
floating potential
and free particles
the internal sensor achieves the highest PD detection sensitivity but the external sensor achieves the lowest one.While for the metal shim left on the fringe of spacer
the extractor type loop UHF sensor achieves the highest PD detection sensitivity.