MENG Yanjing, DING Xiaojie, WANG Anping, et al. Research on Manufacturing Technology of Nonmagnetic Stainless Steel Spring for Button Contact[J]. High voltageapparatus, 2015, 51(5): 108-111.
MENG Yanjing, DING Xiaojie, WANG Anping, et al. Research on Manufacturing Technology of Nonmagnetic Stainless Steel Spring for Button Contact[J]. High voltageapparatus, 2015, 51(5): 108-111. DOI: 10.13296/j.1001-1609.hva.2015.05.020.
Research on Manufacturing Technology of Nonmagnetic Stainless Steel Spring for Button Contact
which are made of nonmagnetic stainless steel 130 M
were tempered to investigate the effects of tempering temperature and time on the spring wires’ hardness and tensile strength
and the springs’ characteristic value. In addition
salt spray test was conducted to reveal the corrosion resistance of the springs. The results show that the tempering temperature range is rather wide for the springs
the hardness and tensile strength increase after tempering
the characteristic value approaches to the upper limit of theoretical one
and all of the dimensions
the characteristic value
and the appearance quality of the springs meet the technical requirements.