LI Xuan, ZHANG Chuanji, WU Shipu, et al. Research on PCB Rogowski Coil for Lightning Current Measurement[J]. High voltageapparatus, 2015, 51(10): 158-162.
LI Xuan, ZHANG Chuanji, WU Shipu, et al. Research on PCB Rogowski Coil for Lightning Current Measurement[J]. High voltageapparatus, 2015, 51(10): 158-162. DOI: 10.13296/j.1001-1609.hva.2015.10.026.
Research on PCB Rogowski Coil for Lightning Current Measurement
峰值10 k A的8/20μs标准雷电流最大测量误差不超过2%。结果表明:所设计的PCB型线圈结合带补偿型二阶RC积分器
可以在保证频带的前提下保持较大的信号输出强度
且有较高测量准确度。
Abstract
In order to improve the measurement precision of Rogowski coil for lightning current
a design principle of the PCB Rogowski coil is proposed in this paper. Through the reasonable designation of parameters of the coil and the integration method
the contradiction between measurement bandwidth and output signal amplitude is solved; a simulation of designed coil and integrator parameters is carried out. Under the proposed coil structure and integrator
the maximum measurement error of standard lightning current of 8/20 μs which has a peak current of 10 k A is less than 2%. The result shows that: the structure of designed PCB coil with two order RC integrator
has large output signal and meanwhile guarantees the bandwidth