Controlled Frictional Resistance of SF<sub>6</sub> Arc Extinguishing Chamber to Improve Manufacturing Quality of the Circuit Breaker Product

CAO Yongjin; PENG Xiang; WU Peng; HANG Fei

doi:10.13296/j.1001-1609.hva.2016.02.031

您当前的位置：

首页 >

文章列表页 >

Controlled Frictional Resistance of SF₆ Arc Extinguishing Chamber to Improve Manufacturing Quality of the Circuit Breaker Product

更新时间：2025-04-26

- Controlled Frictional Resistance of SF₆ Arc Extinguishing Chamber to Improve Manufacturing Quality of the Circuit Breaker Product
- High VoltageApparatus Vol. 52, Issue 2, Pages: 191-194+199(2016)
- 作者机构：
  
  1. 国家电网天津城南供电分公司
  2. 江苏省如高高压电器有限公司
- 作者简介：
- 基金信息：
- DOI：10.13296/j.1001-1609.hva.2016.02.031
  CLC： TM561
- Published：2016
- 稿件说明：
移动端阅览
[1]曹永进,彭翔,吴鹏,杭飞.控制SF_6灭弧室摩擦阻力以改善断路器产品制造质量[J].高压电器,2016,52(02):191-194+199.

CAO Yongjin, PENG Xiang, WU Peng, et al. Controlled Frictional Resistance of SF₆ Arc Extinguishing Chamber to Improve Manufacturing Quality of the Circuit Breaker Product[J]. High voltageapparatus, 2016, 52(2): 191-194+199.
[1]曹永进,彭翔,吴鹏,杭飞.控制SF_6灭弧室摩擦阻力以改善断路器产品制造质量[J].高压电器,2016,52(02):191-194+199. DOI： 10.13296/j.1001-1609.hva.2016.02.031.

CAO Yongjin, PENG Xiang, WU Peng, et al. Controlled Frictional Resistance of SF₆ Arc Extinguishing Chamber to Improve Manufacturing Quality of the Circuit Breaker Product[J]. High voltageapparatus, 2016, 52(2): 191-194+199. DOI： 10.13296/j.1001-1609.hva.2016.02.031.

摘要

对某型SF6高压断路器产品灭弧室的摩擦阻力进行了理论计算

实际测量了该摩擦阻力

分析找出了影响灭弧室摩擦阻力的因素并发现此因素对产品操作功也有重大影响。通过对该因素的改善

降低了机构的操作功

说明了将灭弧室的摩擦阻力作为产品装配制造过程的控制点能有效改善产品装配质量

提高产品寿命。

Abstract

The frictional resistance of a certain type of SF6 high voltage circuit breaker’s arc extinguishing chamber were calculated and measured. The factor influencing the frictional resistance were analyzed and identified. It was found that the factors also exert significant effects on the mechanical work of the circuit breaker. By improving the factor the mechanical work was reduced

which indicates that control of the frictional resistance of arc extinguishing chamber during the product assembly process can effectively improve the product assembly quality and prolong the product life.

关键词

Keywords

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Mathematical Calculus for Nozzle Blocking Phenomena in a SF₆ Puffer Type Circuit Breaker

The Discussion on the Steady Temperature Rise Test of SF₆ Circuit Breaker

An Experimental Investigation into the Use of an SF₆ Rotary Arc Circuit Breaker as an HVDC Switching Element

Arc Reignition and Dielectric Recovery of SF₆ Rotating Arc

Investigation on Electric Endurance Capability of SF₆ Interrupter

Related Author

林建民

M.T.C.Fang

王章启

李胜利

张少安

Zhang J. R. G. R. Jones Huang J. H. Ma Z.

G.R.Jones

黄建华

Related Institution

England

Liverpool University

西安高压电器研究所

华中理工大学

能源部电科院

⁰

Controlled Frictional Resistance of SF6 Arc Extinguishing Chamber to Improve Manufacturing Quality of the Circuit Breaker Product

DOI：10.13296/j.1001-1609.hva.2016.02.031

摘要

Abstract

关键词

Keywords

references

Controlled Frictional Resistance of SF₆ Arc Extinguishing Chamber to Improve Manufacturing Quality of the Circuit Breaker Product