MMC System Topology and Its DC Fault Current Blocking Capability

TANG Li; YUAN Xufeng; LI Ning; TANG Shenghui; TAN Zhukui

doi:10.13296/j.1001-1609.hva.2017.06.017

您当前的位置：

首页 >

文章列表页 >

MMC System Topology and Its DC Fault Current Blocking Capability

更新时间：2025-04-26

- MMC System Topology and Its DC Fault Current Blocking Capability
- High VoltageApparatus Vol. 53, Issue 6, Pages: 96-104(2017)
- 作者机构：
  
  1. 贵州大学电气工程学院
  2. 贵州电力科学研究院
- 作者简介：
- 基金信息：
- DOI：10.13296/j.1001-1609.hva.2017.06.017
  CLC： TM46;TM721.1
- Published：2017
- 稿件说明：
移动端阅览
[1]唐立,袁旭峰,李宁,唐圣辉,谈竹奎.MMC系统级拓扑及其直流故障电流阻断能力研究[J].高压电器,2017,53(06):96-104.

TANG Li, YUAN Xufeng, LI Ning, et al. MMC System Topology and Its DC Fault Current Blocking Capability[J]. High voltageapparatus, 2017, 53(6): 96-104.
[1]唐立,袁旭峰,李宁,唐圣辉,谈竹奎.MMC系统级拓扑及其直流故障电流阻断能力研究[J].高压电器,2017,53(06):96-104. DOI： 10.13296/j.1001-1609.hva.2017.06.017.

TANG Li, YUAN Xufeng, LI Ning, et al. MMC System Topology and Its DC Fault Current Blocking Capability[J]. High voltageapparatus, 2017, 53(6): 96-104. DOI： 10.13296/j.1001-1609.hva.2017.06.017.

摘要

由于直流断路器成本较为昂贵

尚处于试验阶段

具备直流故障电流阻断能力的MMC拓扑才是实现输配电网可控性

提高MMC运行可靠性的关键。文中在分析传统半桥型模块化多电平换流器（half bridge sub module based modular multilevel converter

HBSM-MMC）直流侧故障机理的基础上

对具有直流故障电流阻断能力MMC相关研究进行综述。分析了桥臂优化MMC的拓扑结构及直流故障抑制能力

包括子模块混合型MMC及二极管阻断型MMC;分析了单相优化MMC拓扑结构及直流故障电流阻断能力

包括桥臂交替导通MMC和混合级联型MMC。仅从理论角度来说

具备直流故障电流阻断能力的MMC拓扑结构研究已经较为成熟

但混合子模块优化控制、改进子模块封装、串联子模块和开关器件的协调配合、器件冷却等工程实现诸多问题还有待进一步研究。

Abstract

Because of high cost and immaturity of DC circuit breaker

the modular multilevel converter（MMC） topology with DC fault current blocking capability plays an important role in realizing the controllability of power grid and improving the operation reliability of MMC.In this paper

based on the analysis of DC-side fault mechanism of the traditional half bridge MMC

the researches on MMC are reviewed.The topology and the DC fault current suppression capability of the MMC with optimized bridge are analyzed

including the submodule hybrid MMC and the diode blocking type MMC.The topology and the DC fault current blocking capability of the single-phase optimized MMC are discussed

including the bridge arm alternately conducting type MMC and the hybrid cascaded MMC.It is concluded that the theoretical researches on the MMC topology with DC fault current blocking capability have become mature

but the engineering implementation topics

such as optimum control of hybrid submodule

improvement of submodule packaging

coordination of serial module and switching device

and device cooling

need further study.

关键词

Keywords

references

Views

434

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Fault Current Blocking Control Strategy for DC Grid Based on Hybrid MMC

Research and Design of MMC-HVDC Power Module

Recent Development of Voltage Source Converter Technology and Its Application to FACTS

Technique of Electromagnetic Transient Simulation Based on the User-defined Model of Pscad/EMTDC for MMC

Transient Voltage Stabilization and Control Optimization for Large-scale Wind Power UHV DC Transmission System

Related Author

XU Panteng

XIN Yechun

JIANG Shouqi

WANG Xiaoxue

ZHU Bo

CHEN He

WANG Hefei

JIANG Ge

Related Institution

Guangzhou Bureau of EHV transmission company of China Southern Power Grid Co., Ltd.

School of Electric Power Engineering, Northeast Electric Power University

Xi’an XD Power System Co.,Ltd.

Anhui Electric Overhaul Company of State Grid

Nanjing SAC Automation Co.,Ltd.

⁰