SI Wenrong, FU Chenzhao, HUANG Hua, et al. Review on Detection Technologies for PD Signals Using Fiber Optic Sensor of Extrinsic Fabry-Perot Interferometer[J]. High voltageapparatus, 2018, 54(11): 20-32.
SI Wenrong, FU Chenzhao, HUANG Hua, et al. Review on Detection Technologies for PD Signals Using Fiber Optic Sensor of Extrinsic Fabry-Perot Interferometer[J]. High voltageapparatus, 2018, 54(11): 20-32. DOI: 10.13296/j.1001-1609.hva.2018.11.003.
Review on Detection Technologies for PD Signals Using Fiber Optic Sensor of Extrinsic Fabry-Perot Interferometer
Partial discharge(PD)detection for power equipments mainly includes pulse current method
radio frequency(high frequency)method
transient ground voltage method
UHF method
chemical detection method
opticaldetection method and ultrasonic method. Among them
the PD detection method based on optical fiber sensing tech-nologies has the advantages of safety
insulation and anti-electromagnetic interference
so it is suitable to be de-signed as embedded or intrusive sensors installed on the inner or outer shell of power equipments for PD on-line mon-itoring or live detection with prospects for development. In this paper
the measurement method of PD based on opti-cal fiber sensing technologies
principle parameters and advantages and disadvantages are summarized
and thenthe detection technology of extrinsic Fabry-Perot interferometers(EFPI)optical fiber sensing is introduced. The prin-ciple and research progress of detecting PD ultrasonic signal based on EFPI fiber optic sensor and its performancetests are described in detail. The key parameters and application problems in the development of the EFPI PD fiber optic sensor are analyzed. Finally
the development trend of the EFPI PD fiber optic sensor is expected.