WANG Quan, ZHOU Yunhai, YAO Junwei, et al. State Evaluation of Vacuum Circuit Breaker Based on Combination Weighting and Ideal Interval Method[J]. High voltageapparatus, 2019, 55(4): 39-45.
WANG Quan, ZHOU Yunhai, YAO Junwei, et al. State Evaluation of Vacuum Circuit Breaker Based on Combination Weighting and Ideal Interval Method[J]. High voltageapparatus, 2019, 55(4): 39-45. DOI: 10.13296/j.1001-1609.hva.2019.04.006.
State Evaluation of Vacuum Circuit Breaker Based on Combination Weighting and Ideal Interval Method
Evaluating circuit breaker operation state objectively and reasonably is an important approach to improving its operation reliability and ensure the safe and stable operation of power system. In order to evaluate the operation state of circuit breaker
an ideal interval method and combination weighting approach is proposed by treating the evaluation criterion as ideal interval number concept. Firstly
considering the limitations of a single weighting method
the subjective weights are determined by using improvement method of gray correlation degree and the objective weights are determined by using entropy method. On this basis
the method of moments estimator is introduced in order to obtain the optimal combination of subjective and objective weights through solving the minimum deviation optimal function. Then in the proposed method
the distance between the evaluated sample and the standard ideal interval is calculated by means of ideal interval
and the evaluation level of circuit breaker is determined according to the principle of selecting nearest after the distance value gets inverted substitution and normalization. Finally
the cases are presented to verify the feasibility and validity of this proposed method
and it is suitable to provide guidance for the further maintenance work of circuit breaker.