Corrosion Characteristics of Aluminum Radiator for Valve Cooling System Based on Constant Potential Method

ZHANG Wangping; ZHENG Feng; HAO Liangshou; YANG Yuehui; GE Mengxin; LI Daoyu; WANG Shengping; FAN Youping

doi:10.13296/j.1001-1609.hva.2019.05.027

您当前的位置：

首页 >

文章列表页 >

Corrosion Characteristics of Aluminum Radiator for Valve Cooling System Based on Constant Potential Method

更新时间：2025-04-26

- Corrosion Characteristics of Aluminum Radiator for Valve Cooling System Based on Constant Potential Method
- High VoltageApparatus Vol. 55, Issue 5, Pages: 175-181(2019)
- 作者机构：
  
  1. 南方电网超高压输电公司天生桥局
  2. 武汉大学电气工程学院
  3. 南方电网超高压输电公司贵阳局
  4. 中国地质大学材料与化学学院
- 作者简介：
- 基金信息：
- DOI：10.13296/j.1001-1609.hva.2019.05.027
  CLC： TM721.1
- Published：2019
- 稿件说明：
移动端阅览
[1]张望平,郑丰,郝良收,杨跃辉,葛梦昕,李道豫,王圣平,樊友平.基于恒电位法的阀冷却系统铝散热器腐蚀特性研究[J].高压电器,2019,55(05):175-181.

ZHANG Wangping, ZHENG Feng, HAO Liangshou, et al. Corrosion Characteristics of Aluminum Radiator for Valve Cooling System Based on Constant Potential Method[J]. High voltageapparatus, 2019, 55(5): 175-181.
[1]张望平,郑丰,郝良收,杨跃辉,葛梦昕,李道豫,王圣平,樊友平.基于恒电位法的阀冷却系统铝散热器腐蚀特性研究[J].高压电器,2019,55(05):175-181. DOI： 10.13296/j.1001-1609.hva.2019.05.027.

ZHANG Wangping, ZHENG Feng, HAO Liangshou, et al. Corrosion Characteristics of Aluminum Radiator for Valve Cooling System Based on Constant Potential Method[J]. High voltageapparatus, 2019, 55(5): 175-181. DOI： 10.13296/j.1001-1609.hva.2019.05.027.

摘要

目前高压直流输电阀冷却系统普遍存在均压电极结垢问题

严重的甚至影响高压直流系统的正常运行。从均压电极结垢的源头即散热器的腐蚀出发

以安顺换流站的换流阀的内冷水系统为对象

基于电化学原理、恒电位法和测试技术

分析铝散热器的腐蚀机理

从温度、悬浮树脂浓度、水流速、溶解氧浓度和PH值5个方面讨论铝散热器腐蚀的影响因素和作用机制

得出了抑制铝散热器腐蚀的各因素最佳值

并建设性地提出了改善阀冷系统限制其腐蚀结垢的方法

为解决南方电网其他换流站内冷却水系统的腐蚀结垢提供科学依据。

Abstract

At present

the problem of grading electrode scaling is common in the cooling system of HVDC converter valve

which seriously affects the normal operation of HVDC system. Based on the internal cooling water system of the converter valve of the Anshun converter station

the corrosion of the aluminum radiator which is the source of grading electrode scaling is analyzed by the electrochemical principle

the constant potential method and the testing technique. The influence factors and mechanism of corrosion of aluminum radiator are discussed from five aspects:temperature

suspension resin concentration

water flow rate

dissolved oxygen concentration and pH value. The optimum values of the factors that inhibit the corrosion of aluminum radiator are obtained. And the method of improving the corrosion and scaling of the valve cooling system is put forward constructively

in order to provide a scientific basis for solving corrosion and scaling of the other converter station cooling water system of China southern power grid.

关键词

Keywords

references

Views

110

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Study of Influencing Factors on Polluted RTV Coatings Hydrophobicity Migration

Application of Fitting Based Contact Angle Algorithm in Silicone Rubber Hydrophobicity Detection

Influencing Factors on Frequency-domain Dielectric Spectroscopy of Oil-paper Insulation System

Investigation into the Influencing Factors on Detection Accuracy of SF₆ Decomposition Products

Calculation and Analysis on Surface Electric Field Intensity of Bundled Conductors for UHVAC Transmission Lines

Related Author

WANG Ya-nan

DONG Liang

LI He-ming

LI Man

L Fang-cheng

XU Zhi-niu

LI He-ming1

ZHOU Jing-jing2

Related Institution

National Engineering Laboratory for Biomass Power Generation Equipment,North China Electric Power University

金华电业局

National Engineering Laboratory for Biomass Power Generation Equipment,North China Electric Power University,Baoding 071003,China 2.Jinhua Electric Power Industry Bureau

The UHV Administration of Hunan Electric Power Corporation

State Key Laboratory of Electrical Insulation and Power Equipment, Xi’an Jiaotong University

⁰