Design of Cam Profile Curve Based on the Output Power Characteristic Curve

CHENG Junwen; LI Jundi; HUAN Lu; YANG Chen; PAN Hongwei

doi:10.13296/j.1001-1609.hva.2020.04.031

您当前的位置：

首页 >

文章列表页 >

Design of Cam Profile Curve Based on the Output Power Characteristic Curve

更新时间：2025-04-26

- Design of Cam Profile Curve Based on the Output Power Characteristic Curve
- High VoltageApparatus Vol. 56, Issue 4, Pages: 199-203(2020)
- 作者机构：
  
  国网新疆电力有限公司电力科学研究院
- 作者简介：
- 基金信息：
- DOI：10.13296/j.1001-1609.hva.2020.04.031
  CLC： TM561.2
- Published：2020
- 稿件说明：
移动端阅览
[1]程俊文,李俊蒂,桓露,杨晨,潘红伟.按输出力特性曲线设计凸轮轮廓曲线[J].高压电器,2020,56(04):199-203.

CHENG Junwen, LI Jundi, HUAN Lu, et al. Design of Cam Profile Curve Based on the Output Power Characteristic Curve[J]. High voltageapparatus, 2020, 56(4): 199-203.
[1]程俊文,李俊蒂,桓露,杨晨,潘红伟.按输出力特性曲线设计凸轮轮廓曲线[J].高压电器,2020,56(04):199-203. DOI： 10.13296/j.1001-1609.hva.2020.04.031.

CHENG Junwen, LI Jundi, HUAN Lu, et al. Design of Cam Profile Curve Based on the Output Power Characteristic Curve[J]. High voltageapparatus, 2020, 56(4): 199-203. DOI： 10.13296/j.1001-1609.hva.2020.04.031.

摘要

针对以往设计断路器弹簧操动机构均是先确定满足动触头速度特性的输出力特性;再根据所需输出特性按照功或功率相等的等效原则计算动触头各行程下的凸轮轮廓半径;最后拟合出凸轮轮廓曲线。文中以设计真空断路器弹簧操动机构上配备的摆动滚子从动件盘形凸轮合闸行程中的轮廓曲线为模型

在以往的设计方法上提出了利用速度瞬心和微积分原理求得凸轮轮廓曲线的方法

该方法解决了传统设计方法繁琐的重复计算

不仅能方便的得到满足输出力特性曲线的凸轮轮廓

并能快速得到凸轮上各行程的压力角。用该方法得出的真空断路器合闸过程中的凸轮轮廓曲线与实际凸轮轮廓曲线进行对比

验证了方法的正确性

对设计弹簧操动机构中满足理想合闸特性的凸轮轮廓具有一定的借鉴意义。

Abstract

In the past

the circuit breaker spring operating mechanism was designed to first determine the output force characteristics satisfying the velocity characteristics of the moving contact

and then calculate the cam profile radius of the moving contact under each stroke according to the equivalent principle of equal work or power according to the required output characteristics.Finally

the cam profile curve is fitted.In this paper

the contour curve in the closing stroke of the wobbler-follower disc camshaft equipped on the spring operating mechanism of the vacuum breaker is designed as a model.In the previous design method

the principle of using the instantaneous center of the speed and calculus is proposed.The method of the cam profile curve solves the cumbersome repeat calculation of the conventional design method

and can not only easily obtain the cam profile satisfying the output force characteristic curve

but also quickly obtain the pressure angle of each stroke on the cam.The comparison of the cam profile curve and the actual cam profile curve during the closing process of the vacuum circuit breaker obtained by this method verifies the correctness of this method

and has a certain degree of design for the cam profile that meets the ideal closing characteristics in the spring operating mechanism.The design of the spring operating mechanism to meet the ideal closing characteristics of the cam profile has a certain reference value.

关键词

Keywords

references

Views

101

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Optimized Design on Cam of Spring Operation Mechanism for Vacuum Circuit Breaker

Optimization of Spring Operating Mechanism for Vacuum Circuit Breaker

Optimum Design of a Spring Operating Mechanism for the Vacuum Circuit Breaker in the Viewpoint of Dynamical Coordination

Rigid-flexible Multi-body Dynamics and Simulation of Spring Operating Mechanism for Vacuum Circuit Breakers

Simulation and Optimization for Mechanical Characteristics of Spring Operating Mechanism in Vacuum Circuit Breaker

Related Author

TANG Kaihang

GU Le

SU Haibo

LIU Junxiang

BI Fan

PENG Zhenbo

LI Xingyu

YOU Yimin

Related Institution

Qingyuan Power Supply Bureau, Guangdong Power Grid Co., Ltd.

Electric Power Research Institute, Guangzhou Power Supply Bureau, Guangdong Power Grid Co., Ltd.

School of Electrical Engineering and Automation, Xiamen Institute of Technology

School of Electrical Engineering and Automation, Xiamen University of Technology

Xingji Electric Appliance Co., Ltd.

⁰